INSTRUCTION MANUALCEL-ST2HA211© CANON INC. 2012 PRINTED IN THE EUThe lenses and accessories mentioned in this Instruction Manual are current as of Jun
10PowerBattery• Charging p.24• Battery check p.28• Battery information check p.246Power outlet p.250Auto power off p.46LensAttaching/Deta
100The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE.* <d> stands for Pro
101d: Program AE If the “30"” shutter speed and the maximum aperture blink, it indicates underexposure.Increase the ISO speed or use flash. If
102In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure suiting the brightness of the
103s: Shutter-Priority AE If the maximum aperture blinks, it indicates underexposure.Turn the <6> dial to set a slower shutter speed until the
104In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the correct exposure suiting the subject b
105f: Aperture-Priority AEPress the depth-of-field preview button to stop down the lens to the current aperture setting. You can check the depth of fi
106In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewf
107You can select one of four methods to measure the subject brightness. In fully-automatic modes (1/C), evaluative metering is set automatically.1Pre
108Exposure compensation can increase (brighter) or decrease (darker) the standard exposure set by the camera.Although you can set the exposure compen
109By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three successiv
11Index to FeaturesSelf-timer p.98Remote control p.114Exposure adjustmentExposure compensation p.108AEB p.109AE lock p.110FlashBuilt-i
110Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure
111When bulb is set, the shutter stays open while you hold down the shutter button completely, and closes when you let go of the shutter button. This
112F: Bulb ExposuresIf you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this,
113Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations (mirror shock) can also h
114With Remote Controller RC-6, RC-1 or RC-5 (sold separately), you can shoot remotely up to about 5 meters/16.4 feet from the camera. RC-6 or RC-1 en
115In the d/s/f/a/F shooting modes, you can press the <D> button to pop-up and fire the built-in flash whenever desired. If the built-in flash h
116D Using the Built-in FlashEffective Range of Built-in Flash [Approx. meters/feet]Using the red-eye reduction lamp before taking a flash picture can
117D Using the Built-in FlashIn the same way as normal exposure compensation, you can set exposure compensation for flash. You can set flash exposure
118D Using the Built-in FlashFE (flash exposure) lock obtains and locks the correct flash exposure reading for any part of a subject.1Press the <D&
119The built-in flash and external Speedlite settings can be set with the menu. The [External flash ***] menu options for external Speedlites are appl
12Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used
1203 Setting the FlashN[Built-in flash func. setting] and [External flash func. setting] Settable Functions* Regarding the [FEB] (Flash exposure brack
1213 Setting the FlashN Shutter sync.Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts.If [2nd curtai
1223 Setting the FlashN1Display the Custom Function. Select [External flash C.Fn setting], then press <0>.2Set the Custom Function. Turn the &
123The camera’s built-in flash can work as a master unit with Canon Speedlites having a wireless slave feature and wirelessly trigger the Speedlite to
124Using Wireless FlashNThis shows the most basic setup for fully-automatic wireless flash with one Speedlite.Steps 1 to 3 and 6 to 8 apply to all wir
125Using Wireless FlashN5Select [Wireless func.]. For [Wireless func.], select [0], then press <0>. Under [Wireless func.], [Channel], etc., w
126Using Wireless FlashNThis shows fully-automatic wireless flash shooting with one external Speedlite and the built-in flash.You can change the flash
127Using Wireless FlashNMultiple Speedlite slave units can be treated as one flash unit or separated into slave groups whose flash ratio can be set.Th
128Using Wireless FlashN[1 (A:B)] Multiple slave units in multiple groups Divide the slave units into groups A and B, and change the flash ratio to ob
129Using Wireless FlashN[1 (A:B C)] Multiple slave units in multiple groupsThis is a variant of the [1 (A:B)] setup on the preceding page. This setup
13Handling PrecautionsLCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effecti
130Using Wireless FlashNThe built-in flash can also be added to wireless flash shooting explained on pages 123-129.The basic settings are shown below.
131Using Wireless FlashNFlash Exposure CompensationWhen [Flash mode] is set to [E-TTL II], flash exposure compensation can be set. The flash exposure
132Using Wireless FlashNWhen [Flash mode] is set to [Manual flash], the flash output can be set manually. The flash output settings ([1 flash output],
133Basically operates like a built-in flash for easy operation.When an EX-series Speedlite (sold separately) is attached to the camera, almost all the
134External SpeedlitesSync SpeedThe camera can synchronize with non-Canon compact flash units at 1/250 sec. and slower speeds. With large studio flash
1356Live View ShootingYou can shoot while viewing the picture on the camera’s LCD monitor. This is called “Live View shooting.”Live View shooting is e
1361Set the Live View shooting/Movie shooting switch to <A>.2Display the Live View image. Press the <0> button. The Live View image will
137A Live View ShootingBattery Life with Live View Shooting The figures above are based on a fully-charged Battery Pack LP-E6 and CIPA (Camera &
138A Live View Shooting Each time you press the <B> button, the information display will change.About the Information DisplayMagnifying frameIS
139If you press the <m>, <o >,<n>, or <A> button during Live View shooting, the setting screen will appear on the LCD m
14Quick Start Guide1Insert the battery. (p.26)To charge the battery, see page 24.2Attach the lens. (p.31)When attaching an EF-S lens, align it with th
140Function settings particular to Live View shooting are explained here. The menu options under the [z] tab are explained below.The functions settabl
141z Menu Function Settings Mode 1The shooting operation noise is quieter than the normal shooting. Continuous shooting is also possible. High-speed
142The AF modes available are [Live mode], [u Live mode] (face detection, p.143), and [Quick mode] (p.147).If you want to achieve precise focus, set t
143Using AF to Focus3Focus the subject. Aim the AF points over the subjects and press the shutter button halfway. When focus is achieved, the AF poi
144Using AF to Focus2Focus the subject. Press the shutter button halfway and the camera will focus the face covered by the <p> frame.When focu
145Using AF to FocusAF operation Focusing will take slightly longer. Even when focus has been achieved, pressing the shutter button halfway will foc
146Using AF to FocusShooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces.
147Using AF to FocusThe dedicated AF sensor is used to focus in the One-Shot AF mode (p.89), using the same AF method as with viewfinder shooting.Alth
148Using AF to Focus3Focus the subject. Aim the AF points over the subjects and press the shutter button halfway. The Live View image will turn off,
149You can magnify the image and focus precisely manually.1Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus roughly
15Quick Start Guide6Set the Mode Dial to <1> (Full Auto). (p.52)All the necessary camera settings will be set automatically.7Focus the subject.
150Live View Shooting CautionsNotes About the Live View Image Under low or bright light conditions, the Live View image might not reflect the brightn
151Live View Shooting CautionsNotes About the Shooting Results When you shoot continuously with the Live View function for a long period, the camera’
1537Shooting MoviesMovie shooting is enabled by setting the Live View shooting/Movie shooting switch to <k>. The movie file format will be MOV.W
154Connecting the camera to a TV set is recommended to playback movies (p.184-185).When the shooting mode is set to a shooting mode other than <a&g
155k Shooting Movies Cautions for movie shooting are on pages 163-164. If necessary, also read the Live View shooting cautions on pages 150 and 151.
156k Shooting Movies Each time you press the <B> button, the information display will change.About the Information DisplayMagnifying frameAE lo
157k Shooting MoviesWhen the shooting mode is <a> (p.106), you can manually set the shutter speeds, aperture, and ISO speeds shown below and sho
158k Shooting MoviesYou can take a still photo at anytime by pressing the shutter button completely, even during movie shooting.Taking still photos du
159If you press the <o>, <n>, or <A> button while the image is displayed on the LCD monitor, the setting screen will appear on the L
16For detailed information, reference page numbers are provided in parentheses (p.**).NomenclatureHDMI mini OUT terminal (p.185)Remote control termina
160Function settings particular to movie shooting are explained here. When the Live View shooting/Movie shooting switch is set to <k>, the menu
161x Menu Function SettingsTotal Movie Recording Time and File Size Per MinuteDue to the file system, movie shooting will stop automatically if the fi
162x Menu Function SettingsThe built-in microphone records monaural sound. Stereo sound recording is possible by connecting an external stereo microph
163Notes on Movie ShootingRecording and Image Quality If the attached lens has an Image Stabilizer, the Image Stabilizer will operate at all times ev
164Notes on Movie ShootingAbout the <E> icon and camera’s internal temperature increase When you shoot movies continuously for a long period or
165 8Image PlaybackThis chapter explains how to playback and erase photos and movies, how to display images on a TV screen, and other playback-related
1661Playback the image. Press the <x> button. The last captured image or last image viewed will appear.2Select the image.To playback images s
167x Image Playback About the Highlight AlertWhen the [4 Highlight alert] menu option is set to [Enable], overexposed highlight areas will blink. To
168x Image Playback About the HistogramThe brightness histogram display shows the exposure level distribution and overall brightness. The RGB histogr
169Search for images quickly with the index display showing four or nine images on one screen.1Turn on the index display. During image playback, pres
17NomenclatureTripod socketExtension system terminalBattery compartment cover (p.26)Battery compartment cover release lever (p.26)<V> Focal plan
170x Searching for Images QuicklyWith the single image display, you can turn the <6> dial to jump through the images forward or backward accordi
171You can magnify the image by 1.5x to 10x on the LCD monitor.1Magnify the image. During image playback, press the <u> button. The image will
172You can rotate the displayed image to the desired orientation.1Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>.2Select t
173You can rate images and movies with one of five rating marks: l/m/n/o/p. This function is called rating.1Select [Rating]. Under the [3] tab, selec
1743 Setting RatingsThe total number of images with a given rating can be displayed up to 999. If there are more than 999 images with a given rating,
175During playback, you can press the <Q> button to set the following: [K: Protect images], [b: Rotate image], [9: Rating], [S: Resize] (JPEG im
176Q Quick Control During PlaybackTo rotate an image, set [5 Auto rotate] menu to [OnzD]. If [5 Auto rotate] menu is set to [OnD] or [Off], the [b Rot
177Basically, there are the following three ways to playback the movies you shot.Use the provided AV cable or an HDMI Cable HTC-100 (sold separately)
178k Enjoying MoviesThe movie files recorded on the card can be transferred to a personal computer and played with ImageBrowser EX (provided software)
1791Playback the image. Press the <x> button to display the image.2Select a movie.Turn the <5> dial to select the image. During the sin
18NomenclatureLCD PanelThe display will show only the settings currently applied.Shutter speedBusy (buSY)Built-in flash recycling (buSY)<A> High
180k Playing MoviesFunction Playback Description Exit Returns to the single-image display.7 Play Pressing <0> toggles between play and pause.8 S
181You can edit out the first and last scenes of a movie in 1-sec. increments.1On the movie playback screen, select [X]. The editing screen will be d
182You can playback the images in the card as an automatic slide show.1Select [Slide show]. Under the [4] tab, select [Slide show], then press <0&
1833 Slide Show (Auto Playback) 3Set the play time and repeat option. Turn the <5> dial to select [Set up], then press <0>. For still ph
184You can also view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off
185Viewing the Images on TVThe HDMI Cable HTC-100 (sold separately) is required.1Connect the HDMI cable to the camera. Connect the HDMI cable to the
186Protecting the image prevents it from being erased accidentally.1Select [Protect images]. Under the [3] tab, select [Protect images], then press &
187You can either select and erase images one by one or erase them in one batch. Protected images (p.186) will not be erased.Once an image is erased,
188L Erasing Images2Select [Select and erase images]. Turn the <5> dial to select [Select and erase images], then press <0>. The image w
189The LCD monitor’s brightness is adjusted automatically for optimum viewing. You can set the automatic adjustment’s brightness level (brighter or da
19NomenclatureViewfinder InformationThe display will show only the settings currently applied.Spot metering circle (p.107)Grid (p.49)Area AF frame/Zon
190Changing Image Playback SettingsVertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and computer
1919Post-ProcessingImagesYou can process RAW images with the camera or resize (shrink) JPEG images. A M icon at the upper right of a page title indic
192You can process 1 images with the camera and save them as JPEG images. While the RAW image itself does not change, you can process the RAW image ac
193R Processing RAW Images with the CameraNDisplaying the setting screen Press <0> to display the setting screen. Turn the <5> or <6&g
194R Processing RAW Images with the CameraN White balance (p.72)You can select the white balance. If you select [P], turn the <6> dial to set
195R Processing RAW Images with the CameraN Color space (p.86)You can select either sRGB or Adobe RGB. Since the camera’s LCD monitor is not compati
196R Processing RAW Images with the CameraN Chromatic aberration correctionWhen [Enable] is set, lateral chromatic aberration caused by the lens (co
197You can resize an image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3/4 images. JPEG 6 a
198S ResizeResize Options According to Original Image SizeOriginal Image SizeAvailable Resize Settings4 63 kk4k
19910Sensor CleaningThe camera has a Self Cleaning Sensor Unit attached to the image sensor’s front layer (low-pass filter) to shake off dust automati
2Thank you for purchasing a Canon product.The EOS 7D is a high-performance, digital SLR camera featuring a fine-detail CMOS sensor with about 18.0 ef
20NomenclatureMode DialFully-Automatic ModesAll you do is press the shutter button.Fully-automatic shooting suitable for the subject.1: Full Auto (p.5
200Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the fron
201Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust sti
2023 Appending Dust Delete DataN3Photograph a solid-white object. At a distance of 20 cm - 30 cm / 0.7 ft. - 1.0 ft., fill the viewfinder with a patt
203Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc.The surface of the image sensor is extr
2043 Manual Sensor CleaningN While cleaning the sensor, never do any of the following. Doing any of the following will cut off the power and close th
20511Printing Images Printing (p.206)You can connect the camera directly to a printer and print out the images in the card. The camera is compatible
206The direct printing procedure is done entirely with the camera while you look at the LCD monitor.1Set the camera’s power switch to <2>.2Set u
207Preparing to Print6Playback the image. Press the <x> button. The image will appear, and the <w> icon will appear on the upper left to
208The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s i
209wPrinting Select the size of the paper loaded in the printer, then press <0>. The paper type screen will appear. Select the type of the pa
21NomenclatureLensLens with a distance scaleLens without a distance scaleFocus mode switch (p.31)Lens mount index (p.31)Contacts (p.13)Hood mount (p.2
210wPrinting4Set the printing effects. Set as necessary. If you need not set any printing effects, go to step 5. The screen display may differ depen
211wPrinting5Set the date and file number imprinting. Set as necessary. Select <I>, then press <0>. Set as desired, then press <0>
212wPrintingIn step 4 on page 210, select the printing effect. When the <e> icon is displayed next to <z>, press the <B> button. You
213wPrintingYou can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you se
214wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the gr
215You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot
216W Digital Print Order Format (DPOF)4 Exit the setting. Press the <M> button. The print order screen will reappear. Next, select [Sel.Image
217W Digital Print Order Format (DPOF) Sel.ImageSelect and order images one by one.To display the three-image view, press the <I> button. To re
218With a PictBridge printer, you can easily print images with DPOF.1 Preparing to print. See page 206. Follow the “Connecting the Camera to a Printe
21912Customizing theCameraWith Custom Functions, you can change the camera functions to suit your preferences. Also, the current camera settings can b
22NomenclatureBattery Charger LC-E6Charger for Battery Pack LP-E6 (p.24).Battery Charger LC-E6ECharger for Battery Pack LP-E6 (p.24).Battery pack slot
2201Select [8]. Turn the <6> dial to select the [8] tab.2Select the group. Turn the <5> dial to select C.Fn I - IV, then press <0>
2213 Custom FunctionsNC.Fn I: ExposureA LV shootingk Movie shooting1 Exposure level incrementsp.222k2 ISO speed setting increments kk (<a>)3ISO
2223 Custom Function SettingsNC.Fn I: ExposureC.Fn I -1 Exposure level increments0: 1/3-stop1: 1/2-stopSets 1/2-stop increments for the shutter sp
2233 Custom Function SettingsNC.Fn I -5 Bracketing sequenceThe AEB shooting sequence and white balance bracketing sequence can be changed.0: 0, -,
2243 Custom Function SettingsNC.Fn II: ImageC.Fn II -1 Long exposure noise reduction0: Off1: AutoFor 1 sec. or longer exposures, noise reduction i
2253 Custom Function SettingsNC.Fn II -3 Highlight tone priority0: Disable1: EnableImproves the highlight detail. The dynamic range is expanded be
2263 Custom Function SettingsNC.Fn III -2 AI Servo 1st/2nd image priorityFor the AI Servo AF and continuous shooting modes, you can change the Ser
2273 Custom Function SettingsNC.Fn III -4 Lens drive when AF impossibleIf autofocus is executed, but focus cannot be achieved, the camera can eith
2283 Custom Function SettingsNC.Fn III -6 Select AF area selection modeMake the mode selectable by selecting [Register], then pressing <0>.Tur
2293 Custom Function SettingsNC.Fn III -8 VF display illuminationThe AF points, grid, etc., in the viewfinder can be illuminated in red.0: AutoThe
231Getting StartedThis chapter explains preparatory steps before you start shooting and basic camera operations.Attaching the StrapPass the end of the
2303 Custom Function SettingsNC.Fn III -11 AF-assist beam firingThe AF-assist beam can be emitted by the camera’s built-in flash or by an external
2313 Custom Function SettingsNC.Fn III -13 Mirror lockup0: Disable1: EnablePrevents camera vibrations caused by the reflex mirror action that can
2323 Custom Function SettingsNC.Fn IV -3 Add image verification data0: Disable1: EnableData for verifying whether the image is original or not is
2333 Custom Function SettingsN1Select [8C.Fn IV -1: Custom Controls]. A list of camera controls and their assigned functions will appear (p.234). Wh
2343 Custom Function SettingsN* The AF stop button is provided only on super telephoto IS lenses.Assignable Functions to Camera ControlsFunctionPage*M
2353 Custom Function SettingsN < > Metering and AF startWhen you press the button assigned with this function, metering and AF are executed.*1:
2363 Custom Function SettingsN < > ONE SHOT z AI SERVOIn One-Shot AF mode, when you hold down the button to which this function has been assign
2373 Custom Function SettingsN < > Picture StylePress <0> to display the Picture Style selection screen (p.66) on the LCD monitor. <
238Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently.1Select [My Menu settings]
239Under the Mode Dial’s <w>, <x>, and <y> positions, you can register most of the current camera settings including your preferred
241Remove the protective cover.2Attach the battery. As shown in the illustration, attach the battery securely. To detach the battery, follow the abo
240w Register Camera User SettingsN Shooting functionsShooting mode + setting, ISO speed, AF mode, AF point, Metering mode, Drive mode, Exposure comp
241When you set the copyright information, it will be appended to the image as Exif information.1Select [Copyright information]. Under the [7] tab, s
2423 Setting Copyright InformationN Changing the entry areaPress the <A> button to toggle between the top and bottom entry areas. Moving the c
24313ReferenceThis chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to
244When you press the <B> button while the camera is ready to shoot, you can display [Displays camera settings], [Displays shooting functions] (
245B Button Functions* If flash exposure compensation is set with an external Speedlite, the flash exposure compensation icon will change from <y&g
246You can check the battery’s condition on the LCD monitor. A Battery Pack LP-E6 has a unique serial No., and you can register multiple battery packs
2473 Checking the Battery InformationYou can register up to six Battery Pack LP-E6’s to the camera. To register multiple battery packs to the camera,
2483 Checking the Battery InformationAffixing the serial No. onto all the registered Battery Pack LP-E6’s with a label makes it convenient.1Write the
2493 Checking the Battery InformationYou can check the remaining capacity of any battery pack (even while not installed) and also when it was last use
25Charging the BatteryRecharge the battery on the day before or on the day it is to be used.Even during non-use or storage, a charged battery will gr
250With the AC Adapter Kit ACK-E6 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level.1Con
251The date/time (back-up) battery maintains the camera’s date and time. Its service life is about 5 years. If you turn on the power and the date/time
252System MapWide Strap EW-EOS7D Bundled Accessories Eyecup Eg Anti-Fog Eyepiece Eg Dioptric Adjustment Lenses Eg Angle Finder C Date / time CR161
253System MapEF-S lenses EF lenses Stereo AV Cable AVC-DC400ST Timer Remote Controller TC-80N3 Remote Switch RS-80N3 Wireless Controller LC-5 HDMI Cab
254o: Set automatically k: User selectable : Not selectableFunction Availability TableMode Dial1 C d s f aFQualityJPEGk k k k k k kRAWk k k k k k
255Function Availability Tableo: Set automatically k: User selectable : Not selectable*1: Refers to “(2) Blurring/sharpening the background” funct
2561 Shooting 1 (Red) Page2 Shooting 2 (Red)Menu SettingsQuality73 / 83 / 74 / 84 / 76 / 86601 / 41 / 61Red-eye On/OffOff / On 116BeepOn / Off–Release
257Menu Settingsy Shooting 3 (Red) Pagez Shooting 4 (Red)* For movie shooting, see page 260.3 Playback 1 (Blue)Dust Delete Data Obtains data to be us
258Menu Settings4 Playback 2 (Blue) Page5 Set-up 1 (Yellow)Highlight alert Disable / Enable 167AF point displayDisable / Enable 168HistogramBrightness
259Menu Settings6 Set-up 2 (Yellow) Page7 Set-up 3 (Yellow)LCD brightnessAuto: Adjustable to one of three brightness levelsManual: Adjustable to one o
26Load a fully charged Battery Pack LP-E6 into the camera. The camera’s viewfinder will become bright when a battery is installed, and darken when the
260Menu Settings8 Custom Functions (Orange) Page9 My Menu (Green)x Movie (Red)Page* In the <1/C> mode, it will be [Sound recording]: [On] or [Of
261If a problem occurs, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or
262Troubleshooting Guide If the power is cut off while an image is being recorded to the card, the access lamp will still continue to light/blink for
263Troubleshooting Guide Set the lens focus mode switch to <AF> (p.31). To prevent camera shake, hold the camera still and press the shutter b
264Troubleshooting Guide Make sure the external flash (or PC sync cord) is securely attached to the camera. If you use a non-Canon flash with Live V
265Troubleshooting Guide If you operate the camera’s dial or lens during movie shooting, the respective operation noise will also be recorded. Use an
266Troubleshooting Guide If you use a card which already has images recorded, the file numbering might start from the last image in the card (p.84).
267If there is a problem with the camera, an error message will appear. Follow the on-screen instructions.* If the error still persists, write down th
268•TypeType:Digital, single-lens reflex, AF/AE camera with built-in flashRecording media: Type I or II CF card, UDMA-compatibleImage sensor size: 22.
269Specifications• ViewfinderType: Eye-level pentaprismCoverage: Vertical/Horizontal approx. 100%Magnification: Approx. 1.0x (-1 m-1 with 50mm lens at
27<1> : The camera turns on.<2> : The camera is turned off and does not operate. Set to this position when not using the camera. Whenever
270Specifications•ShutterType: Electronically-controlled, focal-plane shutterShutter speeds: 1/8000 sec. to 1/60 sec. (Full Auto mode), X-sync at 1/25
271Specifications• Movie ShootingMovie compression: MPEG-4 AVCVariable (average) bit rateAudio recording format: Linear PCMFile type: MOVRecording siz
272SpecificationsZoom magnification: Approx. 1.5x - 10xImage browsing methods:Single image, jump by 10 or 100 images, by shooting date, by folder, by
273SpecificationsBattery information: Remaining capacity, Shutter count, and Recharge performance displayedBattery life: With viewfinder shooting:(Bas
274SpecificationsWorking temperature range:5°C - 40°C / 41°F - 104°FWorking humidity: 85% or lessDimensions (W x H x D): 69 x 33 x 93 mm / 2.7 x 1.3 x
275Specifications• EF 28-135mm f/3.5-5.6 IS USMAngle of view: Diagonal extent: 75° - 18°Horizontal extent: 65° - 15°Vertical extent: 46° - 10°Lens con
276About MPEG-4 Licensing“This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video
277Safety WarningsFollow these safeguards and use the equipment properly to prevent injury, death, and material damage.Preventing Serious Injury or De
278• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of elec
279European Union (and EEA) only.These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Di
28Turning on the PowerWhen the power switch is set to <1>, the battery level will be indicated in one of six levels: A blinking battery icon (b)
280IMPORTANT SAFETY INSTRUCTIONS1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E
28114Software Start GuideThis chapter gives an overview of the software in the EOS Solution Disk (CD-ROM) provided with the camera and explains how to
282EOS Solution DiskThis disk contains various software for EOS cameras.Communication Software for the Camera and Computer You can download images (s
283Compatible OS1Check that the camera is not connected to your computer.2 Insert the EOS Solution Disk (CD).3 Select your geographic area, country an
284Compatible OS1Check that the camera is not connected to your computer.2 Insert the EOS Solution Disk (CD). On your computer’s desktop, double-clic
285[WINDOWS]EOS Software Instruction Manuals DiskCopy the PDF Instruction Manuals contained on the disk to your computer.1 Insert the EOS Software Ins
286Index10-sec. or 2-sec. delay ...981280x720...1601920x1080...160
287IndexCleaning...199Clear camera settings ...47Color space...
288IndexFocusingAF area...91, 93, 228AF characteristics.225, 226, 227, 235AF mode...88, 236, 245AF point displ
289IndexJump display...170LLandscape ...66Language selection...
29Although the thickness is different between the two types of CF (CompactFlash) cards, the camera is compatible with both types. It is also compatibl
290IndexNNeutral ... 67Noise reductionHigh ISO speed ...224Long exposures...
291IndexSaturation...68Self-timer...98Sensor cleaning ...
INSTRUCTION MANUALCEL-ST2HA211© CANON INC. 2012 PRINTED IN THE EUThe lenses and accessories mentioned in this Instruction Manual are current as of Jun
3Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer.* Battery Charge
30Installing and Removing the CF Card1Open the cover. Set the power switch to <2>. Make sure the access lamp is off, then open the cover.2Remo
311Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrow.2Attach the lens. Align the EF-S lens with the c
32Attaching and Detaching a LensTo zoom, turn the zoom ring on the lens with your fingers.If you want to zoom, do it before focusing. Turning the zoom
33When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a less blurred shot. The procedure explained here is based
34Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points in the viewfinder look sharp. If the knob is difficult to tur
35Basic OperationThe shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely.
36Basic Operation(1)After pressing a button, turn the <6> dial.When you press a button, its function remains selected for 6 seconds (9). During
37Basic OperationBefore using the <5> dial, set the Quick Control Dial switch to <J>.(1)After pressing a button, turn the <5> dial.W
38The shooting settings are displayed on the LCD monitor where you can directly select and set the functions. This is called the Quick Control screen.
39Q Using the Quick Control Screen On the Quick Control screen, select the function and press <0>. The respective setting screen will then appe
4Icons in this Manual<6> : Indicates the Main Dial.<5> : Indicates the Quick Control Dial.<9> : Indicates the Multi-controller.<0
40You can set various functions with the menus such as the image-recording quality, date/time, etc. While looking at the LCD monitor, use the <M>
413 Menu Operations1Display the menu. Press the <M> button to display the menu.2Select a tab. Turn the <6> dial to select a tab.3Select
421Select [LanguageK]. Under the [6] tab, select [LanguageK] (the third item from the top), then press <0>.2Set the desired language. Turn the
43Before You StartWhen you turn on the power for the first time or if the date/time has been reset, the Date/Time/Zone setting screen will appear. Fol
44Before You Start4Set the daylight saving time. Set if necessary. Turn the <5> dial to select [Y]. Press <0> so <r> is displaye
45Before You StartIf the card is new or was previously formatted by another camera or personal computer, formatting the card with the camera is recomm
46Before You StartYou can change the auto power-off time for the camera to turn off automatically after a certain period of non-operation. If you do n
47Before You StartThe camera’s shooting settings and menu settings can be reverted to the default.1Select [Clear all camera settings]. Under the [7]
48Before You Start Camera Settings Live View Shooting SettingsVF grid display DisableLive View shootingEnableAuto power
49The grid and electronic level can be displayed to help keep the camera aimed straight. The grid is displayed in the viewfinder, and the electronic l
5For first-time DSLR users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures.ChaptersIntroductionCamera basics.2Getting
50Displaying the Grid and Electronic Level1Press the <B> button. Each time you press the <B> button, the screen display will change. Dis
512Basic ShootingThis chapter explains how to use the fully-automatic modes (1/C) on the Mode Dial for best results.With the fully-automatic modes (1/
521Set the Mode Dial to <1>.2Aim the Area AF frame over the target subject. All the AF points will be used to focus, and generally the closest
531 Fully Automatic Shooting The focus confirmation light <o> blinks and focus is not achieved.Aim the center of the Area AF frame over an area
54Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective.In the <1> (Full Au
55The <1> Full Auto mode takes care of everything, whereas the <C> Creative Auto mode enables you to easily change the picture’s brightnes
C Creative Auto Shooting56(1) Flash firing<a> (Auto firing), <D> (Flash on), or <b> (Flash off) can be selected.(2) Blurring/sharpen
57C Creative Auto Shooting(4) Image effectsBesides the standard image effect, you can set it for portraits, landscapes, or black-and-white photos. (p.
C Creative Auto Shooting58You can set how long the image is displayed on the LCD monitor immediately after capture. To keep the image displayed, set [
593Image SettingsThis chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lightin
6312Introduction 2Item Check List... 3Conventions Used
60You can select the pixel count and the image quality. Six JPEG recording quality settings are provided: 73/83/74/84/76/86. Three RAW recording quali
613 Setting the Image-recording QualityGuide to Image-recording Quality Settings (Approx.) Figures for the file size, possible shots, and maximum bur
623 Setting the Image-recording QualityA RAW image is raw data output by the image sensor converted to digital data. It is recorded to the card as is,
633 Setting the Image-recording QualityIf the current recording quality is JPEG only, you can press the <P> button to also capture a RAW image (
64Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In the fully-automatic modes (1/C), the ISO speed is set au
65i: Setting the ISO SpeedNIf the ISO speed is set to “A” (Auto), the actual ISO speed to be set will be displayed when you press the shutter button h
66By selecting a Picture Style, you can obtain image effects matching your photographic expression or the subject.In the <1> (Full Auto) mode, y
67A Selecting a Picture StyleNS NeutralThis Picture Style is for users who prefer to process images with their computer. For natural colors and subdue
68You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots.
69A Customizing a Picture StyleNFor Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explain
7Contents54A Customizing a Picture Style ...68A Registering a Picture Style...
70You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User D
71A Registering a Picture StyleN6Set the parameter. Turn the <5> dial to set the parameter as desired, then press <0>.For details, see “C
72White balance (WB) is for making the white areas look white. Normally, the <Q> (Auto) setting will obtain the correct white balance. If natura
73B: Setting the White BalanceNCustom white balance enables you to manually set the white balance for a specific light source for better accuracy. Do
74B: Setting the White BalanceNYou can set the white balance’s color temperature numerically in Kelvin. This is for advanced users.1Select [White bala
75You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature c
76u White Balance CorrectionNWith just one shot, three images having a different color tone can be recorded simultaneously. Based on the color tempera
77If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. With JPEG images, the correction is
78Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumin
793 Lens Peripheral Illumination CorrectionThe camera already contains lens peripheral illumination correction data for about 25 lenses. In step 2, if
Contents8109678Live View Shooting 135A Live View Shooting... 136Shootin
80You can freely create and select the folder where the captured images are to be saved.This is optional since a folder will be created automatically
813 Creating and Selecting a Folder With the Select folder screen displayed, turn the <5> dial to select the desired folder, then press <0&g
82The file name has four alphanumeric characters followed by a four-digit image number (p.84) and extension. The first four characters will be “IMG_”
833 Changing the File Name 4Exit the setting. Enter the required number of alphanumeric characters, then press the <M> button. The new file na
84The four-digit file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 a
853 File Numbering MethodsRestarting the file numbering from 0001 each time the card is replaced or a new folder is created.Whenever the card is repla
86The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB.
874Setting the AF andDrive ModesThe 19 AF points in the viewfinder make AF shooting suitable for a wide variety of subjects and scenes.You can also se
88Select the AF mode suiting the shooting conditions or subject. In fully-automatic modes (1/C), “AI Focus AF” is set automatically.1On the lens, set
89f: Selecting the AF ModeNSuited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achie
9Contents13141112Printing Images 205Preparing to Print ...206w
90f: Selecting the AF ModeNAI Focus AF switches the AF mode from One-Shot AF to AI Servo AF automatically if the still subject starts moving. After t
91As default setting, the following three AF area selection modes can be selected. See the next page for the selection procedure.Single-point AF (Manu
92S Selecting the AF AreaNSelect the AF area selection mode. Press the <S> button. (9) Look through the viewfinder and press the <B> but
93The AF areas are explained starting with the smallest one.Although this is the same as single-point AF, the selected AF point <O> covers a sma
94AF Area Selection ModesThe 19 AF points are divided into five zones for focusing. All the AF points in the selected zone are used for the automatic
95AF Area Selection ModesWith lenses whose maximum aperture is larger than f/5.6With all AF points, cross-type AF sensitive to both vertical and horiz
96Autofocus can fail to achieve focus (the focus confirmation light <o> blinks) with certain subjects such as the following:Subjects difficult t
97Single and continuous drive modes are provided. In the <1> (Full Auto) mode, single shooting is set automatically.1Press the <o> button.
98Use the self-timer when you want to be in the picture. The <Q> (10 sec. timer) can be used in all shooting modes.1Press the <o> button.
995Advanced OperationsIn the d/s/f/a/F shooting modes, you can select the shutter speed, aperture, and other camera settings to change the exposure an
Comments to this Manuals