INDeX 4602 IP Telephone Installation Manual 38DHB0002UKCQ – Issue 2 (11/06/2003)
Page 10 - IPNC Setup Installation Procedure 8. Press the 1 or 0 button to turn 802.1Q on or off respectively. The display is updated to show the
Installation Procedure IPNC Setup - Page 11 QoS Option Setting 3 Administering QoS options is not mandatory, but it is highly recommended. The 802.1Q
Creating the DHCP Scope:Page 12 - Contents Creating the DHCP Scope: The creation of DHCP Scopes should only be performed by System Administrators wit
Creating the DHCP Scope: IPNC Setup - Page 13 7. You can now configure the lease time for the address. Setting too large will mean you will lose t
Page 14 - Adding the 4602 IP Telephone Option (176): Creating the DHCP Scope: Adding the 4602 IP Telephone Option (176): 1. Right click on the ser
Creating the DHCP Scope: Adding the 4602 IP Telephone Option (176): - Page 15 5. In the string value field enter the following: MCIPADD=xxx.xxx
Performance figures and data quoted in this document are typical, and must be specifically confirmed in writing by Avaya before they becom
Page 2 - Contents Contents Introduction... 3 U
Introduction Use of this Manual - Page 3 Introduction Supported by INPC Level 3.3 and INDeX 10.1+ software, the 4602 IP Telephone uses Internet Proto
Page 4 - INDeX Setup Installation Procedure Installation Procedure Prior to installation of the INDeX 4602 IP Telephone on a user's networked PC
Installation Procedure IPNC Setup - Page 5 Installation Requirements To install a 4602 IP Telephone onto INDeX, the following items are required: •
Page 6 - IPNC Setup Installation Procedure Dynamic Address Process This is the recommended method to assign IP and telephony settings to the 4602 IP
Installation Procedure IPNC Setup - Page 7 DHCP Phone Installation 1. Connect the longer LAN cable from the network LAN socket to the power unit&a
Page 8 - IPNC Setup Installation Procedure Static Addressing Pre-Installation Checklist Before performing static addressing on the 4602 IP Telephone,
Installation Procedure IPNC Setup - Page 9 3. Enter the IP address for the gatekeeper followed by the # button. The following message is display
Comments to this Manuals