Canon PIXMA MG7150 User Manual

PIXMA MG7100Setup Guide© CANON INC. 2013series

WEP5. Tap the WEP key number you want to use.6. Tap the screen.7. Enter the WEP key.Character entry is case-sensitive.8. Tap Apply.9. Make sure t

WPA/WPA25. Tap the screen.6. Enter the passphrase.Character entry is case-sensitive.7. Tap Apply.8. Make sure that the passphrase is correct.9. T

Wired Connectiona Preparation for ConnectionBefore Starting Wired Connection Setup1. Make sure that the printer is turned on. If the power is on, th

c Printer Setup1. If the HOME button (A) on the printer is lit, touch the HOME button.2. Flick the screen left or right, then tap Setup.3. Flick t

Character EntryYou can enter the characters when the keyboard is displayed on the printer. Follow the procedure below.1. You can enter the characters

TroubleshootingStandard setupThe Target Access Point is Not DetectedIs the network device (router, etc.) turned on? If the network device is already t

When using multiple access points:Tap Use multiple AccessPoints.An Unknown Access Point is DisplayedAccess points in use nearby may also be detected.T

WEPFailed to connect to the access point.Make sure that the WEP key entered for the access point is correct. In addition, when using WEP key number 2,

WPA/WPA2Failed to connect to the access point.Make sure that the passphrase entered for the access point is correct.If the problem is not resolved, th

To perform Standard setup again1. Touch the HOME button (A).2. Flick the screen left or right, then tap the WLAN icon.3. Tap Wireless LAN setup.

Setup GuideThis guide provides information for setting up a network connection for the printer.Network ConnectionWireless ConnectionPreparation for Co

WPSCannot connect. Connections are being attempted from multiple access points simultaneously.The screen appears when connections are being attempted

Advanced setupThe Target Access Point is Not DetectedIs the network device (router, etc.) turned on? If the network device is already turned on, turn

When using multiple access points:Tap Use multiple AccessPoints.An Unknown Access Point is DisplayedAccess points in use nearby may also be detected.T

DisableFailed to connect to the access point.Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off,

WEPThe WEP Key is Not Displayed AutomaticallyRefer to the manual supplied with the access point or contact its manufacturer.Failed to connect to the a

The device may not be able to connect to the network in the following cases:If the DHCP function of the access point is inactive, enable the DHCP func

WPA/WPA2The Passphrase is Not Displayed AutomaticallyRefer to the manual supplied with the access point or contact its manufacturer.Failed to connect

To perform Advanced setup again1. Touch the HOME button (A).2. Flick the screen left or right, then tap the WLAN icon.3. Tap Wireless LAN setup.

Network ConnectionWireless Connectiona Preparation for ConnectionBefore Starting Wireless Connection Setup1. Make sure that the printer is turned on

2. Flick the screen left or right, then tap the WLAN icon.3. Tap Wireless LAN setup.The (blue) Wi-Fi lamp (A) lights up when wireless connection is

d-A Push Button Methodd Connection Using WPS1. Tap Start setup on the printer.2. Press and hold the WPS button on the access point.For details on

d-B Standard setupd Connection via Standard setup1. Tap Standard setup.2. Tap your access point.3. One of the screens below will be displayed on

d-C WPSd Connection Using WPS1. Tap WPS.2. Tap Push button method.3. Tap OK.4. Press and hold the WPS button on the access point.For details on

d-D Other setup (Advanced setup)d Connection via Advanced setup1. Tap Other setup.2. Tap Advanced setup.3. Tap your access point.4. Tap the secu

Disable5. When the left screen appears, tap OK.The network connection setup is now complete.