User's GuideEM7-0073-000-V.2.0● How to Use This Guide -How to Read This Guide ● How To Use The Documentation Provided ● Reading The D
Photo Application Guide(Electronic documentation) This guide is available on the Setup CD-ROM.This guide, included as a HTML file, describes the utili
1 Load letter- or A4-size plain paper in the Auto Sheet Feeder.2 Press [COPY] or [PHOTO]*.* MP130 3 Press [Menu] repeatedly until <USER DATA> ap
9 Use [ ] or [ ] to select the pattern number that you checked in column A on the printout in step 8. 10 Press [OK]. 11 Repeat steps 9 and 10 for co
Cleaning The Exterior Wipe the machine’s exterior with a clean, soft, lint-free damp cloth. Cleaning The Roller Clean the roller when paper does
• The machine starts cleaning the roller.8 When cleaning has finished, repeat steps 3 to 7 for a total of three times.9 Load letter- or A4-size plain
TroubleshootingSoftware Problems Installing And Uninstalling SoftwareCause Action Other applications are open. Close all applications including anti-
remains in the [Start] menu. Cause Action The ScanGearStarter was uninstalled prior to uninstalling the MP Navigator and MP Drivers.Go to the [Start]
Paper Is Jammed Removing Jammed Paper If <PLEASE CLEAR PAPER JAM AND PRESS [OK] or [START]> is displayed on the LCD, follow this procedure to c
1 Gently pull out any jammed paper from the Auto Sheet Feeder. 2 Press [OK].• If you are printing from an application software, follow the instructi
The paper does not meet the requirements of this machine.Use the paper meeting the requirements of this machine. (See "Recommended Paper And Requ
The Cover Cannot Be Closed The Inner Cover Cannot Be Closed Cause Action The Scan Unit is returned to its original position before the Inner Cover i
Indicates the description of the machine when connected to a computer. Read this when the machine is connected to a Windows system. Read this when t
The Alarm Lamp flashes.• If a message appears: 1. Check the message appearing on the LCD. 2. Follow the instructions and correct the error. For LCD me
The wall outlet is not working normally. Connect an electrical appliance to the wall outlet and check whether the wall outlet is working properly. The
The paper is too thick.Use 17 lb.–28 lb. (64 g/m2–105 g/m2) paper for non-Canon branded paper. (See "Recommended Paper And Requirements")The
Paper Curls Cause Action Paper you are using is too thin.Use 17 lb.–28 lb. (64 g/m2–105 g/m2) paper for non-Canon branded paper. (See "Recomme
Cause Action The document is not loaded correctly. Check that the document is loaded correctly on the Platen Glass. (See "Loading Documents"
The memory card is not correctly inserted into the Card Slots.• Reinsert the memory card into the appropriate Card Slots securely. (See "Insertin
Cannot Print Correctly From The Memory Card Cause Action “?” is printed in the index.The image data does not comply with the DCF (Design Rule for C
In the case of a multi-function machine, the [Unplug/Eject] icon does not appear even when you select [Show Unplug/Eject icon in the taskbar] in the [
Memory card was inserted in the Card Slots at the time the computer was turned ON. Some computers may have this trouble. Remove the memory card and re
The background of the BJ Status Monitor picture is yellow or red.Follow the instructions in the BJ Status Monitor. (See Software Guide, located on you
click, double-clickTerm that indicates selecting a command or option on your computer, generally with a mouse. pointTerm that indicates moving a mou
In the [Print] dialog box, select [Color Options] from the pop-up menu, then reduce the density with the Intensity slider. (See Software Guide, locate
A cause other than the above is suspected. Restart the computer. Cannot Print To A Shared Printer Cause Action The server (the computer to which t
You cannot scan because the machine is connected to a USB hub.Connect the USB cable directly to the computer without using a USB hub. To connect to th
Memory is insufficient. Close other open applications and try again. The hard disk does not have enough available memory. Check that the hard disk has
A cause other than the above is suspected. Restart the computer. You Tried To Create A Multi-page PDF, But Were Not Able To Scan Multiple Documents C
The settings are not activated because you have not restarted your computer. Once you have changed your settings, restart your computer. Cannot Scan
Scanned Image Is Displayed Large (Small) On The Computer Screen Cause Action The image is displayed large (small) in the application. Enlarge or re
printing by pressing [OK]. However, note that ink may run out. If print quality deteriorates or the printout is blank, replace the ink tank.CANNOT USE
CARTRIDGE JAMMEDThe Print Head Holder cannot move. This is normally due to a paper jam. Clear the paper jam or whatever is obstructing the Print Head
COLOR INK LOWThe ink level in the color ink tank is low.Make sure you have a new color ink tank ready to replace the used one when ink runs out. If th
– Explains the settings required for printing from a computer, and describes the MP Drivers.▼ MP Navigator – Explains the functions that MP Navigator
INSERT CARDThere is no memory card in the Card Slots.If you want to photo print from a memory card, insert one (in a card adapter as necessary) into t
PLEASE LOAD PAPER AND PRESS [OK] or [START]The Auto Sheet Feeder is empty. Load paper in the Auto Sheet Feeder. Make sure the stack is below the Paper
machine requires maintenance.
AppendixThis section describes how to change the machine settings, and provides a description of each setting item. How To Change Settings And Explana
3 Press [COPY] or [PHOTO]* depending on the function button (2).* MP130 4 Press [Menu] repeatedly until the menu (3).5 Use [ ] or [ ] to select the
PRESET RATIOMakes enlarged or reduced copies at preset ratios.25% MIN.80% B5 -> A586% A4 -> B595% A4 -> LTR100%115% B5 -> A4123% A5 ->
NONE — — —BDERLESS COPYCopies without any borders.— "Borderless Copying"«Menu: USER DATA»«Menu: INK VOLUME»Name Description Settings Details
ROLLER CLEANINCleans the roller. — "Cleaning The Roller"«Menu: QUIET PRINTING»Name Description Settings Details— Enables/disables quiet prin
Name Description Settings DetailsINDEX Prints thumbnails of all the images stored on the memory card, assigning a number to each thumbnail.— "Pri
Paper Type Displayed On LCD Suitable Paper TypesPLAIN Suitable for plain paper.GLOSSY Suitable for Glossy Photo Paper.H.RES Suitable for High Resoluti
which can convert the text in books or newspaper characters into editable text. ▼ ArcSoft PhotoStudio ArcSoft PhotoStudio allows you to import images
IMPORTANT• For printing a Photo Index Sheet, use only white plain paper. If you print a Photo Index Sheet on paper such as recycled paper that is not
http://www.canon.ca Specifications General Specifications Power sourceAC 110-120V, 50/60 HzAC 220-240V, 50/60 HzPower consumption• Maximum: Approx. 4
Applicable standards• Electrical safety: UL 1950, C-UL• Radiation: FCC Part 15 Class B, IC• Other: IC, Energy Star compliant, CE markAuto Sheet Feeder
• Envelope printable areas:US COM 10: 8 3/8 in. x 3 7/8 in. (206.8 mm x 97.97 mm)European DL: 7 1/2 in. x 4 1/8 in. (185.5 mm x 103.2 mm) System Req
Density adjustment• 5 levelsZoom• 25%-400% Photo Print Specifications (MP130) Interface• Card slots• USB portPaper• Plain paper• Photo Paper ProLayou
Maximum print width8 in. (203.2 mm)Resolution4800 (horizontal) dpi x 1200 (vertical) dpi** Scan Specifications CompatibilityTWAIN/WIA (Windows XP)Sca
As an ENERGY STAR Partner, Canon Inc. has determined that this model meets the ENERGY STAR Program for energy efficiency.The International ENERGY STA
IndexNumerics (–) and (+) Buttons 1 A Access Lamp 1 Alarm Lamp 1 when flashing 1 All images printing 1 Auto Sheet Feeder 1 B Black Button 1 Borderl
reducing/enlarging a copy 1 setting the paper size and type 1 specifications 1 D Date printing 1 Density See Exposure1 Document loading 1 requirements
L LCD (Liquid Crystal Display) 1 LCD messages BLACK INK LOW 1 BLK INK CHANGED? 1 CANNOT USE CARDTURN OFF AND ON 1 CARD READ ERROR REINSERT CARD 1 CARD
IntroductionFeatures Of Your MachineThank you for purchasing the Canon MP130/110. Your machine incorporates the following functions in one simple-to-o
print head 1 replacing ink tanks 1 Memory cards 1 inserting 1 removing 1 Menu ALL IMAGES 1 DENSITY 1 DISPLAY LANG. 1 ENLARGE/REDUCE 1 IMAGE QUALITY 1
Operation Panel 1, 2 P Paper characteristics and applications 1 guidelines 1 loading 1 recommended 1 Paper jams, clearing 1 Paper Output Tray 1 Paper
documents 1 specifications 1 Problems Alarm Lamp flashes 1 cannot close the cover 1 copying 1 general 1 installing/uninstalling software 1 jammed pape
U USB Connector 1 Users in Canada 1 Utility software 1
(1) Paper SupportSupports paper loaded in the Auto Sheet Feeder. Open it before loading paper.(2) Paper Support ExtensionSupports paper loaded in t
(8) USB ConnectorUsed to connect a computer to the machine when printing from or scanning to the computer.(9) Power ConnectorUsed to connect the po
(1) [Photo Index Sheet]* ButtonSwitches the machine to Photo Index Sheet mode.(2) [COPY] ButtonSwitches the machine to copy mode.(3) [SCAN] Button
(11) [OK] ButtonSelects or confirms settings. Also, press this button to return to standby mode after correcting paper jams and other errors that sto
-Using Preset Copy Ratios -Using Custom Copy Ratios ● Advanced Copy Feature -Borderless Copying Photo Printing From A Memory Card (MP130) ● Co
• For details on the photo print mode and Photo Index Sheet features, see "Photo Printing From A Memory Card (MP130)".
Document And Paper HandlingDocument RequirementsThe documents you load on the Platen Glass for copying or scanning must meet these requirements: Docum
2 Load your document. • Place your document face down on the Platen Glass. • Align the upper left corner of your document with the alignment mark on t
– Very thick paper (more than 28 lb. or 105 g/m2) other than Canon genuine paper– Postcards with photographs or stickers adhered to them– Envelopes ma
Super White PaperApprox. 75 sheets (Letter/A4)[Plain Paper]High Resolution PaperApprox. 80 sheets [High Resolution Paper]Glossy Photo Paper10 sheets (
Plain paperLetter(8 1/2 in. x 11 in./215.9 mm x 279.4 mm)Legal(8 1/2 in. x 14 in./215.9 mm x 355.6 mm)A4(8 1/4 in. x 11 3/4 in./210 mm x 297 mm)A5(5 7
Envelopes 241 mm x 105 mm)European DL (8 5/8 in. x 4 3/8 in./220 mm x 110 mm)Printing from your computerdouble flaps, pressure seals, and peel-off sea
(8 1/4 in. x 11 3/4 in./210 mm x 297 mm)printing*/copying whiter side facing up.• Remove the sheets from the Paper Output Tray before the count reache
Matte Photo PaperLetter(8 1/2 in. x 11 in./215.9 mm x 279.4 mm)A4(8 1/4 in. x 11 3/4 in./210 mm x 297 mm)Printing from your computer/photo printing*•
Drivers) Installed? -Is The Machine Specified As The Default Printer? -Is The Machine Set To The Default Printer? -Is The Correct Paper Set In The Aut
mm)4" x 6"(4 in. x 6 in./101.6 mm x 152.4 mm)5" x 7"(5 in. x 7 in./127 mm x 177.8 mm)printing* printing, you can print without any
Photo Paper Plus Double SidedLetter(8 1/2 in. x 11 in./215.9 mm x 279.4 mm)A4(8 1/4 in. x 11 3/4 in./210 mm x 297 mm)5" x 7"(5 in. x 7 in./1
Photo Paper Promm)A4(8 1/4 in. x 11 3/4 in./210 mm x 297 mm)4" x 6"(4 in. x 6 in./101.6 mm x 152.4 mm)Printing from your computer/photo prin
Transparencies11 in./215.9 mm x 279.4 mm)A4(8 1/4 in. x 11 3/4 in./210 mm x 297 mm)Printing from your computerbe obtained by printing on the side that
297 mm)• The T-shirt transfer should be used as soon as it is printed.• Refer to the manuals supplied with the T-shirt transfer for details on how to
1 Open the Paper Support (1), then pull out the Paper Support Extension (2). 2 Place a stack of paper (print side up) in the Auto Sheet Feeder (1), a
2 Prepare the envelopes for loading. IMPORTANT• Press down firmly on the edges of the envelopes to make the folds crisp. Also, press firmly on the ar
3 Place the stack of envelopes (print side up) in the Auto Sheet Feeder (1), and pinch the Paper Guide (A) and adjust it to the left side of the stack
CopyingDocuments You Can Copy For information on the types of documents you can copy, their requirements, and details on loading them, see "Docum
– <A5>: A5 size– <B5>: B5 size• Some of these are not available depending on the country of purchase.4 Press [OK]. 5 Use [ ] or [ ] to s
-Removing Jammed Paper ● The Document Cover Came Off -Reinstalling The Document Cover ● The Cover Cannot Be Closed -The Inner Cover Cannot Be
1 Load the document on the Platen Glass.• For details on how to load documents, see "Loading Documents".2 Press [COPY].3 Use [ ] or [ ] to
2 Press [Menu] five times until <IMAGE QUALITY> appears. 3 Use [ ] or [ ] to select the image quality.– <NORMAL>: Suitable for text-only
3 Use [ ] or [ ] to select the exposure.• Pressing [ ] decreases the density, and pressing [ ] increases the density.4 Press [OK].Reducing Or Enl
4 Use [ ] or [ ] to select the copy ratio.– <25% MIN.>: Reduces the document to 25% when copying. – <80% B5 -> A5>: Reduces a B5-siz
Follow this procedure: 1 Press [COPY].2 Press [Menu] once until <ENLARGE/REDUCE> appears. 3 Use [ ] or [ ] to select <ZOOM>. 4 Press [OK
page without borders. • You can only copy in color with this feature. • The copied image may need to be enlarged to fit onto the selected paper size
6 Use [ ] or [ ] to select <BDERLESS COPY>. 7 Press [OK]. • If a paper type setting is selected that cannot be used in borderless copying, the
Photo Printing From A Memory Card (MP130)There are several ways you can print photos directly from a memory card, without using a computer. In particu
Compatible Memory CardsThe following cards are compatible with the machine. They are inserted into the Card Slots as described below: Slot 2 Slot 1 M
IMPORTANT• This machine only recognizes one memory card at a time. If you insert memory cards into both slots at the same time, you could lose data o
Shared Printer ● Scanning ● Problems Scanning -You Tried To Create A Multi-page PDF, But Were Not Able To Scan Multiple Documents -You Opened
2 Insert the memory card or the card adapter containing the memory card into the appropriate Card Slots. CAUTION• Do not force a memory card into a ca
damage the data on the memory card.1 Press [ON/OFF] to turn OFF the machine.2 Remove the memory card from the Card Slots. Convenient Printing Function
2. Press [Menu] once until <PHOTO PRINT> appears.3. Use [ ] or [ ] to select the printing method, and then press [OK]. 4. Use [ ] or [ ] to
Setting Date Printing Enabling this setting will print the date, recorded by the digital camera, below each thumbnail on an index (A) or on the bott
• The menu number may differ, depending on the photo print settings.7. Use [ ] or [ ] to enable or disable date printing.– <NO>: Disables dat
Follow this procedure: 1 Turn ON the machine, and load letter- or A4-size paper in the Auto Sheet Feeder.• Use completely white plain paper when prin
3 Press [Photo Index Sheet]. 4 Use [ ] or [ ] to select <PRINT>. 5 Press [OK]. 6 Use [ ] or [ ] to select the range of photographs to print
– <LAST 60 IMAGES>: Prints the 60 most recently recorded photographs. – <LAST 90 IMAGES>: Prints the 90 most recently recorded photographs
IMPORTANT• Be sure to fill a circle for every setting item (except options).• If there is more than one Photo Index Sheet, fill all the sheets.• If
• The machine reads the Photo Index Sheet, and prints photographs according to the settings. IMPORTANT• If the LCD displays <PHOTO INDEX SCAN FAILE
About The Photo Application GuideThe Photo Application Guide, a HTML file included on the Setup CD-ROM, describes the utility software and how to use
4 Press [Menu] once until <PHOTO PRINT> appears. 5 Use [ ] or [ ] to select <ALL IMAGES>. 6 Press [OK]. 7 Use [ ] or [ ] to select the
• In order to obtain optimal quality print results, when printing photographs, use Canon-recommended Photo Paper Pro or Photo Paper Plus Glossy.• If y
• You may not be able to print photographs if the file size is too large (4800 dpi x 3600 dpi or more). Try printing the photograph from your compute
Printing An Index This printing method prints thumbnails of the photographs on a memory card. An index is useful to see small versions of all photog
6 Press [OK]. 7 Use [ ] or [ ] to select the paper size. – <LTR>: Letter size– <4"x6">: Card size– <5"x7">: Ca
12 Press [OK]. 13 Press [Color].• To cancel printing, press [Stop/Reset].• You can only print one index at a time. • The image number assigned to each
5 Use [ ] or [ ] to select <SINGLE IMG>. 6 Press [OK]. 7 Use [ ] or [ ] to select the image number.• Press and hold down [ ] or [ ] to qui
13 Use [ ] or [ ] to select the paper type. – <PLAIN PAPER>: Suitable for plain paper.– <GLOSSY>: Suitable for Glossy Photo Paper.– <
• To cancel printing, press [Stop/Reset].• The image printed is enlarged or reduced automatically according to the paper size it is printed on. Depend
7 Use [ ] or [ ] to select <FRAME RANGE> or <DATE RANGE>.• If you select <FRAME RANGE>:1. Press [OK]. 2. Use [ ] or [ ] to selec
How to Use This GuideThis guide is written in HTML (Hyper Text Markup Language), the language used to display texts and images on Worldwide Web Pages.
– <LTR>: Letter size– <4"x6">: Card size– <5"x7">: Card size– <A4>: A4 size10 Press [OK]. 11 Use [ ] or [
15 Select whether to enable date printing or not. (See "Setting Date Printing")16 Press [OK].17 Press [Color]. • To cancel printing, press [
Becoming Familiar With The Software Installing The SoftwareIf you have not already installed the software contained on the Setup CD-ROM supplied with
• CD-ROM drive, or access to one over a network connection• 256-color or greater SVGA monitor (32000 color or better recommended)• 800 x 600 dots or h
2. The currently installed Service Pack is displayed under [System]. IMPORTANT• While the machine is printing from or scanning images to the computer
▼ Easy-WebPrint (Windows only)* ▼ Easy-PhotoPrint ▼ ArcSoft PhotoStudio ▼ ScanSoft OmniPage SE * This is compatible with Microsoft Internet Explorer v
IMPORTANT• When uninstalling the MP Drivers, first uninstall the MP Navigator. If the MP Drivers are uninstalled beforehand, [Canon] may remain in [A
Follow this procedure: 1 Close any open software applications, including virus checkers.2 Click [Start] on the taskbar, point to [All Programs] or [Pr
1 Close any open software applications, including virus checkers.2 Double-click the hard disk icon where the MP Driver was installed, double-click the
Printing From Your ComputerBefore PrintingBefore printing, confirm the following: Is The Software (MP Drivers) Installed? If the software is not ye
(1)Contents screen(2)Description screen▼ Using the Description Screen (1)Clicking the character string with a blue underline allows you to jump to t
Is The Machine Set To The Default Printer? You can check whether the machine is set to the default printer when you open the [Print] screen in the a
1 Load paper in the Auto Sheet Feeder. (See "Loading Paper")2 Open the document in the application software, and select the command to print
• If not, select your machine from the [Printer] pop-up menu.4 Click [Print]. • Be sure to adjust the paper size driver setting for the paper you are
▼ Canceling before the machine starts printing 1. In the [Print] dialog box, click the button to cancel printing.• This in most cases will be [Cancel]
4 In the [Printing Preferences] or [Printer Properties] dialog box, on the [Main] tab, click [Print Advisor]. 5 Follow the instructions on the screen.
Changing The Settings On The [Print] Dialog Box Follow this procedure: 1 Load the paper in the Auto Sheet Feeder. (See "Loading Paper")2 O
[PDF] from [Format]. Clicking [Save] displays a dialog box for specifying a file name and save location.▼ Cancel the changes: 1. Click [Cancel].▼ Star
4 Select the required item from the [Settings] pop-up menu and configure the settings. • The [Page Setup] dialog box changes with each of the [Setting
Maintenance IMPORTANT• When unplugging the power cord, be sure to press [ON/OFF] first. When you press [ON/OFF], the print head is protected by the ca
When To Replace An Ink Tank In general, you will need to replace an ink tank when print quality deteriorates or printouts are blank. However before
(3)Clicking this button allows you to jump to the next page.(4)Clicking this button allows you to jump to index.How To Use The Documentation ProvidedE
"Resetting The Ink Counter"). Please note that if you do not reset the ink counter after replacing an ink tank, the low ink warning will not
5 Hold the empty ink tank’s tab and pull forward to release. Lift out the ink tank. CAUTION• Do not remove the print head from the machine.• Remove o
• Do not shake or drop the ink tank as the ink may leak and stain your clothes or hands. • Do not attempt to reattach the protective cap once you rem
• The LCD displays a message asking if you replaced the color ink tank. 12 If you replaced the color ink tank, press [ ]. If you did not, press [ ].
3 Use [ ] or [ ] to select <INK VOLUME>. 4 Press [OK]. 5 Use [ ] or [ ] to select <INKCOUNT RESET>. 6 Press [OK].• The LCD displays a
If you reset the ink counter when you installed/replaced the ink tanks, you can check the current ink level of the ink tanks at any time. To check the
Printing The Nozzle Check Pattern The nozzle check pattern shows whether the print head is operating properly. • You can also print the nozzle ch
Follow this procedure: 1 Load letter- or A4-size plain paper in the Auto Sheet Feeder.2 Press [COPY] or [PHOTO]*.* MP130 3 Press [Menu] repeatedly unt
• If the ink level is low, the nozzle check pattern is not printed correctly. If the ink level is low, replace the relevant ink tank. (See "Repl
2 Press [Menu] repeatedly until <USER DATA> appears.3 Use [ ] or [ ] to select <MAINTENANCE>.4 Press [OK].5 Use [ ] or [ ] to select &
Comments to this Manuals