Canon imagePROGRAF iPF825 User Manual

1Printer OperationsBasic GuideRead this manual before attempting to operate the printer.Keep this manual in a handy location for future referencing.Pr

10PartsDo not touch the Linear Scale (k), Carriage Shaft (d), or Ink Tube Stabilizer (m). Touching these parts may damage them.•Top Cover

11PartsWhen the printer is in Sleep mode, you can press any button except the Power button to bring the printer online again.•Control Panel1. Rol

12Cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding problems and affect the printing quality

13Attaching the Roll Holder to RollsWhen loading a roll, be careful to avoid hitting the printer hard with the roll. This may damage the Roll Holder

14Remove any loaded paper that will not be used.•If the Wheeled Output Stacker is installed, remove it in advance. (→"Using the Wheeled Outp

15Loading Rolls in the PrinterBe careful not to soil the printing surface of roll paper as you pull it out. This may affect the printing quality. We r

16Loading Rolls in the PrinterDo not detach the Roll Unit in the following cases.•See the following procedure for instructions on attaching the R

17Loading Rolls in the PrinterWe recommend wearing clean cloth gloves when handling rolls to avoid soiling the printing surface.•If the paper is wrink

18Release the caster lock on the Wheeled Output Stacker and remove it beforehand.•If you have selected Media Menu > ManageRemainRoll &g

19Removing the Roll from the PrinterSee the following procedure for instructions on removing the Roll Holder from the roll.• (→"Removing the

2Do not set up the printer in any location exposed to alcohol, thinner, or other volatile liquids. If these substances come into contact with electric

20Removing the Roll from the PrinterSee the following procedure for instructions on removing the Roll Holder from the roll.• (→"Removing the

21Removing the Roll from the PrinterTo load new paper in the printer at this point, see the following procedure.• (→ , Loading Rolls in the Printer) 7

22For details on supported types and sizes of paper, see " Paper Sizes " or the Paper Reference Guide . (→"Paper Sizes," User

23Loading Sheets in the Printer3Lower the Release Lever and close the Top Cover .The printer now starts feeding the paper.After the paper is ad

24Paper cannot be ejected by using the Load/Eject button when print jobs are in progress or during the ink drying period. Before ejecting paper, p

25ConsumablesInk TanksWhen purchasing Ink Tanks, make sure an " A " is printed on the label, along with the following Ink Tank serial nu

26There may be ink around the ink supply section of ink tanks you remove. Handle ink tanks carefully during replacement. The ink may stain clothing.•W

27Replacing Ink TanksThis step is not necessary if a message requests you to replace ink tanks. Check the message on the Display Screen and press

28Replacing Ink TanksStore the Ink Tank you removed in the box with the ink holes (a) facing up. Otherwise, ink may leak and cause stains.•Push th

29Replacing Ink TanksIf you do not agitate the Ink Tank , the ink may sediment, which may affect printing quality.•Never touch the ink holes or ele

3Safety PrecautionsAlways disconnect the power cable from the outlet before cleaning the printer. If the printer is switched on accidentally, moving p

30Replacing Ink TanksInk tanks cannot be loaded in the holder if the color or orientation is incorrect.•If the Ink Tank does not fi t in the holder

31Replacing Ink TanksIf the Ink Lamp is not lit, reload the tank.•56Make sure the Ink Lamp is lit.Close the Ink Tank Cover .The printer wil

32Do not remove the Maintenance Cartridge except to replace it.•To prevent ink from leaking from a used Maintenance Cartridge , avoid dropping

33Replacing the Maintenance CartridgeUsed maintenance cartridges are heavy. Always grasp the cartridge fi rmly and keep the cartridge level during remo

34Replacing the Maintenance CartridgeNever touch the metal contacts (a). This may damage the Maintenance Cartridge .•Always put the used Maintenan

35Replacing the Maintenance CartridgeIf you do not respond within two minutes, shaft cleaner replacement is canceled and the printer goes online autom

36Replacing the Maintenance CartridgeAttach the cap from the new Shaft Cleaner on the used one. Be sure to put the used Shaft Cleaner in the s

37There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during replacement. The ink may stain clothi

38Replacing the PrintheadNever touch the metal contacts of the Carriage . This may damage the printer.•345612Press the Menu button to display

39Replacing the PrintheadDispose of the used Printhead in accordance with local regulations.•3456If the ventilation duct (a) is dirty, use a damp

4Safety PrecautionsNever disassemble the printer or attempt repairs. There are high voltage parts inside the printer that can cause a fi re or electric

40Replacing the PrintheadWhen handling the Printhead , always hold it by the grips (a). Never touch the nozzles (b) or metal contacts (c). This may

41Replacing the PrintheadIf Auto Print is set to On in the printer menu, the printhead will be automatically adjusted after Printhead repl

42*5:For information on the types of paper the printer supports, refer to the Paper Reference Guide.The paper type setting in the printer driver and r

Menu Map43*9:*12:*13:Available after you have used Advanced Adj. in Auto Head Adj. once.Available only on the iPF815.Available only on the iPF825.Docu

Menu Map44*3:*4:*6:*7:Available only if Feed Priority is Print Length.Available only if IP Mode is Automatic.Available only if NetWare is On.Available

Menu Map45*8:*13:Follows the setting in Date Format.Available only on the iPF825.*15:*16:Viewing and configuration is possible for administrators, and

46Numerics2-Inch Paper Core Attachment ... 123-Inch Paper Core Attachment ... 12cCarri

© CANON INC. 2010PRINTED IN JAPANQT5-3242-V1Canon Inc.30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, JapanCanon U.S.A., Inc.One Canon Plaza, Lake

5Setup GuideInstructions for unpacking and setting up the printer, and for installing the printer driverBasic Guide 1 (this manual)Descriptions of bas

6Documentation ConventionsSymbolsThe following symbols are used in the documentation to indicate safety information and explanations of restrictions o

7Canon Large Format Printer iPF815 iPF825FCC Regulations (U.S.A)This device complies with Part 15 of the FCC Rules. Operation is subject to the foll

8iPF825The right leg of the Stand .The left leg of the Stand .When carrying the printer, have six people hold it by these handles under both sid

9Parts Stand Roll Holder Ejection Support Stationary Output Stacker Paper Feed Slot Holder Stopper Ink Tank Cover Control Panel