Canon imagePROGRAF iPF9400 User Manual download pdf (Page 105)

If the paper is not visible, lift the Ejection Guide, re-

move the Roll Holder, and clear the paper jam from

below.

After removing the paper, make sure there are no

other scraps of paper in the printer, and then lower

the Ejection Guide.

If the Carriage is on the left, move the Carriage to

the right until it stops.

Important

• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you

turn on the printer.

Lower the Release Lever and close the Top Cover.

Turn the printer on. (See "Turning the Printer On and Off.")

→User's Guide

Roll paper cannot be inserted into the paper feed slot

Cause Corrective Action

The roll paper is warped. Straighten out curls and reload the roll.

Paper is jammed by the paper feed slot. Remove the jammed paper.

(See "Clearing Jammed Roll Paper.") →P.100

(See "Clearing a Jammed Sheet.") →P.103

The paper source selection is incorrect. Press the Load button and select the paper source.

iPF9400

Roll paper cannot be inserted into the paper feed slot

Basic Guide

Troubleshooting Problems Regarding Paper

105

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 153 154

No comments

Canon imagePROGRAF iPF9400 User Manual Page 105