Canon imagePROGRAF iPF9400 User Manual Page 75

  • Download
  • Add to my manuals
  • Print
  • Page
    / 154
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 74
Remove paper
1
Remove the paper.
Rolls (See "Removing the Roll from the Printer.") →P.15
Sheets (See "Removing Sheets.") →P.21
Access the Prep.MovePrinter menu
1
If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, re-
place the Maintenance Cartridge.
(See "Replacing the Maintenance Cartridge.")
→P.46
2
On the Tab Selection screen of the Control Panel, press or
to select the Settings/Adj. tab ( ).
Note
If the Tab Selection screen is not displayed, press the Menu button.
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press or to select Prep.MovePrinter, and then press the OK button.
5
Press or to select the level of transfer, and then press the OK button.
6
Press or to select Execute, and then press the OK button to display the confirmation screen.
7
Press or to select Yes, and then press the OK button.
The printer is now prepared for transfer.
Level 1
Once preparations are finished, a message on the Display Screen requests you to turn off the printer.
Turn off and pack the printer. There is no need to remove the ink tanks.
(See "Pack the printer.")
→P.78
Level 2 and Level 3
When the preparation is finished, instructions are displayed on the Display Screen.
Remove the ink tanks before packing the printer.
(See "Removing Ink Tanks.")
→P.76
Important
If consumables must be replaced, the message "Consumables must be replaced. Call for service." is
shown on the Display Screen and preparation is not possible. If this message is displayed, press the OK
button and contact your Canon dealer for assistance.
iPF9400
Preparing to Transfer the Printer
Basic Guide
Printer Relocation Preparing to Transfer the Printer
75
Page view 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 153 154

Comments to this Manuals

No comments