1 UndercoverEye™ Trekker LANC Remote Surveillance System Instruction Manual Copyright ©, PixController, Inc. http://www.pixcontroller.com
10 Switches 1 & 2 control the address code of the UndercoverEye™ Trekker LANC controller box. Both the SlimFire Remote Control or Wireless PIR
11 LANC Recording Time Switch 5 and 6 sets the recording time of the UndercoverEye™ Trekker LANC on a PIR event Walk-Test Mode When Test Mode is
12 Introduction to the Wireless PIR Motion Sensor The PixController DigitalEye RF (Radio Frequency) is a wireless camera controller which works in
13 UndercoverEye™ Trekker LANC 12V Battery & Charger Included with your UndercoverEye unit is a rechargeable 12V Li-Ion battery and 12V char
14 Using other Video Cameras with your Trekker LANC Board Video Cameras Board and Pinhole Cameras You can use any 12V video camera with a stand
15 Room setup: PIR Motion sensor trigger, video camera connected to a wireless transmitter Recording Setup: Video receiver connected to the Trekk
16 Typical Field Setups The PixController UndercoverEye™ Trekker LANC Surveillance Camera System is an unattended groundhog video surveillance sys
2 Introduction The PixController UndercoverEye™ Trekker LANC is a complete all-in-one groundhog video surveillance recording system. Simply turn
3 What’s included with your UndercoverEye™ Trekker LANC System Your UndercoverEye™ Trekker LANC system contains the following items: • Undercove
4 UndercoverEye™ Trekker LANC System Components UndercoverEye™ Trekker LANC Exterior Components UndercoverEye™ Trekker LANC Interior Componen
5 Compatible Camcorders Does my Camcorder have a LANC port? If you have either a Sony or Canon camcorder it may have a LANC port. The LANC port i
6 Setting up the UndercoverEye™ Trekker LANC Step 1 Connect the RF antenna to the SMA antenna connector as shown. The RF antenna is a tilt-swi
7 VTR Mode Setup VTR Mode Setup Camcorder Mode Setup Step 4a (Connections for VTR Mode) When using the VTR mode the camcorder will be used as a
8 Camcorder Mode Setup Step 5 Power on the Trekker system as show. Note: Before powering up the Trekker system please read the remaind
9 Powering up the UndercoverEye™ Trekker LANC Before turning power on to the UndercoverEye™ Trekker LANC you must connect the LANC cable between
Comments to this Manuals