XA20-XA25 and HF G30 Using Wi-Fi to Play Images and Movies on a Computer
2-c-1.[Search for Access Points] method The camcorder will automatically detect access points in the vicinity. After you select the desired access
In the [Encryption Key] field, enter the encryption key. Touch [OK]. 2-c-5. Touch [OK]. [Connected] will appear on the camcorder's screen an
2-d-2. Enter the SSID. Touch the [SSID] field. Enter the SSID and then touch [OK] > [Next]. 2-d-3. Select the Authentication/Encryption Metho
2-d-5. Enter the [Encryption Key] In step 2-d-4., if you selected [OPEN NONE], entering the encryption key is not necessary. Touch the [Encryptio
2-d-8. Touch [ ] / [ ] to change the value and then touch [OK]. Enter the following information using the procedure explained above for the IP
Touch [OK]. [Connected] will appear on the camcorder's screen and the connection will be established. Step 3: Playing Back Movies and Phot
3. Camcorder: Touch [End] > [OK] when finished. This concludes the procedure for using Wi-Fi to playback images and movies on a computer. IMPO
IMPORTANT When using the camcorders Wi-Fi functions, do not cover the Wi-Fi antenna with your hand or other object. Covering it may interfere
Using the Media Server function, you can wirelessly view your movies and photos from your computer or similar device. You will need an access point
3. Touch [ ]. 4. Drag your finger up or down bring [Wi-Fi] into the orange selection bar, and touch the button. 5. Touch [Media Server].
Step 2: Connect to an Access Point Using Wi-Fi Connect to an access point. If you have already completed the settings for connecting to an access
[WPS: Button]* Simply press and hold the WPS button on your access point and then touch the camcorders screen. This is the easiest connection metho
: (Press to exit after entering the information.) : Text field : Letter/number keys : / (Switch between letters and numbers/special characters.
2-a-2. Within 2 minutes, touch [OK] on the camcorders screen. The camcorder will connect to the access point. You can touch [Stop] and then [OK
[Connected] will appear on the camcorder's screen and the connection will be established. Proceed to Step3: Playing Back Movies and Photos
You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress. [Connected] will appear on the camcorder&apos
Comments to this Manuals