Canon DC 310 User Manual download pdf (Page 73)

Additional Information • 73

Cannot edit my recordings or add

recordings to the disc with the DVD

device.

- It may not be possible to edit or add

recordings with an external DVD

recorder on a disc recorded with this

camcorder.

Memory Card Operation

Memory card cannot be inserted.

- Memory card is not facing the correct

direction. Turn the memory card over

and reinsert it ( 28).

Cannot record on the memory card.

- Memory card is full. Erase still images

( 55) to free some space or replace

the memory card.

- Memory card was not initialized.

Initialize the memory card ( 59).

- The folder and file numbers have

reached their maximum value. Set

[FILE NOS.] to [RESET] ( 68) and

insert a new memory card.

- The write-protect switch on an SD or

SDHC memory card is set to prevent

accidental erasure. Change the position

of the write-protect switch.

Memory card cannot be played back.

- Set the camcorder to mode

(53).

Image cannot be erased.

- Image is protected. Cancel the

protection ( 58).

- The write-protect switch on an SD or

SDHC memory card is set to prevent

accidental erasure. Change the position

of the write-protect switch.

appears in red.

- A memory card error occurred. Turn off

the camcorder. Remove and reinsert

the memory card. Initialize the memory

card ( 59) if the icon still appears in

red.

List of Messages

List of Messages (in alphabetical order)

CANNOT ENTER THE STANDBY

MODE NOW

- The camcorder cannot enter the Quick

Start standby mode ( 32) while the

disc is being recognized after it was

inserted or if the remaining battery

charge is too low.

CANNOT PLAY BACK

- The disc is dirty or you attempted to

play back a disc type not supported by

this camcorder (not DVD-R/RW) or a

disc that is dirty or scratched.

- This message can also appear if

condensation has formed. Wait until the

camcorder dries completely before

resuming use ( 79).

CANNOT READ THE DISC

CHECK THE DISC

- Disc could not be read. Try cleaning it

or replace the disc ( 77).

- This message can also appear if the

camcorder has exceeded its

operational temperature. Turn off the

camcorder and let it cool down before

resuming use.

- This message can also appear if

condensation has formed. Wait until the

camcorder dries completely before

resuming use ( 79).

- The disc may not be loaded correctly.

Try removing the disc and reinserting it

( 26).

• CANNOT RECORD

• CANNOT RECORD

CHECK THE DISC

- There is a problem with the disc.

Replace the disc ( 26).

- This message can also appear if

condensation has formed. Wait until the

camcorder dries completely before

resuming use ( 79).

- The disc’s recording surface may be

dirty or scratched.

- This message may appear when the

camcorder is repeatedly subject to

vibration.

COPY

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 92 93

Comments to this Manuals

No comments