Canon MVX4i User Manual Page 120

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 119
120
Connection Diagram
Check the type and orientation of the DV or USB terminal and make sure you connect the
DV cable or USB cable properly.
Using a USB cable
Using an IEEE1394 (DV) cable
Operation may not work correctly depending on the software and the
specifications/settings of your computer.
If the computer freezes while you have connected the camcorder, disconnect
and reconnect the DV cable. If the problem persists, disconnect the interface
cable, turn off camcorder and computer, turn camcorder and computer back on
and reconnect them.
Before connecting the camcorder to the computer using a DV cable make sure
that camcorder and computer are not connected with a USB cable, and that no
other 1394 device is connected to the computer.
Make sure that camcorder and computer are not connected with a DV cable
before connecting the camcorder to the computer using the USB cable.
Otherwise, the computer may not operate properly.
Depending on the video editing software you use, you may need to set the
power switch of the camcorder to a mode other than PLAY. Refer also to the
instruction manual of the editing software.
We recommend powering the camcorder from a household power source while
it is connected to the computer.
Refer also to the instruction manual of the computer.
The programs ZoomBrowser EX and Image Browser included with the supplied
CD are intended for use only with images recorded on the memory card.
IFC-300PCU USB Cable (supplied)
USB terminal
6-pin
Commercially available DV cable
IEEE1394 (DV) terminal
4-pin
MVX4i_P-E.book Page 120 Tuesday, June 7, 2005 7:50 PM
Page view 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 146 147

Comments to this Manuals

No comments