Canon Vixia HF21 Operations Instructions download pdf (Page 149)

Additional Information  149

[Control for HDMI]: Activates the HDMI-CEC (Consumer Electronics Con-

trol) function. When you connect the camcorder to an HDTV compatible

with HDMI-CEC using an HDMI cable, you can control the camcorder’s

playback using the remote control of the TV.

• If set to [ On], when the camcorder is connected to a compatible

HDTV using an HDMI cable, the video input on the TV will automatically

be set to the camcorder’s video input. Then, you can use the up/down/

left/right buttons and the OK or SET button on the TV’s remote control

to play back your recordings.

• Depending on the TV set, additional settings may be required on the TV

itself to activate the HDMI-CEC function. Refer to the TV’s instruction

manual.

• Correct operation of the HDMI-CEC function cannot be guaranteed

even when connecting the camcorder to compatible TV sets. If you

cannot use the remote control of the TV, set [Control for HDMI] to [

Off] and operate the camcorder directly or use the camcorder’s wireless

controller.

• The remote control of the TV can only be used to play back movies or

photos ( or mode only). If the camcorder is connected to the

TV while it is set to a recording mode, depending on the TV used, turn-

ing off the TV will automatically turn off the camcorder even if it is

recording at the time.

[Photo Numbering]: Select the photo numbering method to be used on a

new memory card. Photos are automatically assigned consecutive num-

bers from 0101 to 9900, and stored in folders containing up to 100 pho-

tos. Folders are numbered from 101 to 998.

[ Reset]: Photo numbers will restart from 101-0101 every time you

insert a new memory card.

[ Continuous]: Photo numbers will continue from the number following

that of the last photo recorded with the camcorder.

• If the memory card you insert already contains a photo with a larger

number, a new photo will be assigned a number one higher than that of

the last photo on the memory card.

• We recommend using the [ Continuous] setting.

• The photo number indicates the name and location of the file on the

memory card. For example, the file name of a photo numbered 101-

0107 is “IMG_0107.JPG”, stored under the folder “DCIM\101CANON”.

[Firmware]: You can verify the current version of the camcorder's firm-

ware. This menu option is usually unavailable.

COPY

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 191 192

No comments

Canon Vixia HF21 Operations Instructions Page 149