Canon XF105 User Manual download pdf (Page 80)

Recording Audio

Activating the Microphone Attenuator

You can activate the external microphone’s attenuator (20 dB) if the XLR

terminal switch is set to MIC or MIC+48V.

1 Open the desired XLR terminal’s microphone attenuator submenu.

[m Audio Setup] [Audio Input] [XLR1 Mic Att.] or [XLR2 Mic Att.]

2 Select [On] and then press SET.

IMPORTANT

• When connecting a microphone or device that does not support

phantom power, make sure to set the XLR terminal switch to MIC or

LINE, respectively. If you set the switch to MIC+48V, the microphone or device may be damaged.

Adjusting the Audio Level

You can set the audio level to auto or manual for each channel. When both CH1 and CH2 are set to the built-in

microphone (0 77), the settings for CH1 will automatically be applied to CH2.

Automatic Audio Level Adjustment

Set the audio level switch of the desired channel to A (automatic) to let the

camcorder automatically adjust that channel’s audio level. If CH1 and CH2

are set to the built-in microphone and you set CH1 to automatic audio level

adjustment, then the camcorder will also automatically adjust the audio

level for CH2.

NOTES

• When both CH1 and CH2 are set to the same audio input (external

microphone or external line input), if the audio level is set to automatic,

you can use the [m Audio Setup] [Audio Input] [XLR ALC Link]

setting (0 148) to link the audio level adjustment of both channels.

[m Audio Setup]

[Audio Input]

[XLR1 Mic Att.]

[XLR2 Mic Att.]

[Off]

CH1/CH2 audio level

switches

COPY

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 185 186

No comments

Canon XF105 User Manual Page 80