Canon XF305 User Manual download pdf (Page 111)

111

Recording

Optical Axis Shift

Optical Axis Sh ift

This function aids in a dual camera setup for 3D recording by allowing you

to adjust the position of the image stabilization lens.

1 Open the [Enable] submenu to activate optical axis shift.

[l Camera Setup] [Axis Shift] [Enable]

2 Select [On] and then press SET.

• Y appears on the bottom of the screen.

3 Open the optical axis [Adjust] screen.

[l Camera Setup] [Axis Shift] [Adjust]

• Four directional icons appear on the screen.

4 Use the joystick or wireless controller to adjust the picture.

• If the picture cannot be adjusted anymore in a particular direction, the

corresponding directional icon will turn gray.

• You can use the [l Camera Setup] [Axis Shift] [GUI Color]

setting to change the color of the icons and the [Reset] setting to

reset the position of the lens.

• You can check the lens position using the display on the lower right

of the screen.

5 Press SET when finished.

• If you press the CANCEL button, the lens will move back to its

position prior to adjustment.

NOTES

• The range of adjustment depends on the current zoom position.

• The more the lens position is adjusted, the bigger the deviation at the

center of the picture will be during zoom. By centering on an object at

full telephoto and then adjusting at full wide-angle, the amount of

amount of deviation will be reduced.

Operating modes:

[l Camera Setup]

[Axis Shift]

[Enable]

[Off]

[l Camera Setup]

[Axis Shift]

[Adjust]

COPY

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 216 217

No comments

Canon XF305 User Manual Page 111