Canon Speedlite 430EX III-RT User Manual download pdf (Page 53)

Wireless Settings

You can check the transmission status by viewing the color of the

<D> lamp.

You can set whether or not to fire the master unit as a wireless flash that

controls the slave unit. When master flash firing is set to ON, the master

unit is fired as firing group A.

Set master flash firing to ON or

OFF.

Press <8>.

Turn <9> to select the flash firing

symbol, then press <8>.

Turn <9> to select master flash

firing ON or OFF, then press <8>.

j: Master flash firing ON

` : Master flash firing OFF

The <D> Lamp

Color Status Description Action

Green Lit

Transmission OK –

Red

Lit

Not connected Check the channel and ID.

Blinking

Too many units

Change the master and slave unit total to

16 or less.

Error

Turn the master unit and slave unit off and

on again.

Master Flash Firing ON/OFF

If the transmission channels of the master unit and slave unit are

different, the slave unit will not fire. Set both to the same number or set

both to “AUTO”.

If the wireless radio IDs of the master unit and slave unit are different, the

slave unit does not fire. Set to the same number.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 107 108

No comments

Canon Speedlite 430EX III-RT User Manual Page 53