Canon EF 85mm f/1.4L IS USM User Manual download pdf (Page 12)

ENG-11

Hood

The ET-83E hood cuts out unwanted light and protects the front of the lens from rain, snow, and dust.

Attachment position mark

Stop position mark

Red dot

● Attaching

Align the red attachment position mark on the

hood with the red dot on the front of the lens,

and then rotate the hood in the direction of the

arrow until it is rmly attached with the red dot

and stop position mark on the hood aligned.

Button

● Removing

Keep your nger pressed down on the button

located on the side of the hood, and then rotate

the hood in the direction of the arrow until the

attachment position mark on the hood is aligned

with the red dot on the front of the lens to detach

it. The hood can be reverse-mounted on the lens

for storage.

 If the hood is not attached properly, vignetting (darkening of the perimeter of the picture) may occur.

 Grasp and rotate the base of the hood when attaching and detaching it. There are cases in which it may

become deformed if the hood is rotated with it grasped near to the rim.

1 2 ... 7 8 9 10 11 12 13 14 15

No comments

Canon EF 85mm f/1.4L IS USM User Manual Page 12