Camera User GuideThis guide explains camera features and procedures in detail.AdvancedBefore Using the CameraShootingPlayback/ErasingPrint/Transfer Se
8Batteryz Do not place the batteries near a heat source or expose it to direct flame or heat.z The batteries should not be immersed in water or sea wa
98PlaybackCannot play back.You attempted to play back images shot with another camera or images edited with a computer.z Computer images that cannot b
99TroubleshootingBatteryBatteries consumed quickly.Batteries are not the right type.z Use only unused AA-size alkaline batteries or Canon AA-size NiMH
100Printing with a direct print compatible printerCannot printThe camera and printer are not properly connected.z Securely connect the camera and prin
101List of MessagesList of MessagesThe following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print
102No imageNo images recorded on memory card.Image too largeYou attempted to play back an image larger than 4992 x 3328 pixels or with a large data si
103List of MessagesToo many marksToo many images have been marked with print settings or transfer settings. Cannot process any more.Cannot complete!Co
104AppendixBattery HandlingBattery ChargeThe following icon and message will display.Battery Handling Precautionsz This camera uses AA-size alkaline b
105Appendixz Before installing the batteries, wipe the battery terminals well with a dry cloth.If the battery terminals are soiled with oil from one’s
106Handling the Memory CardSD Memory Card Write Protect TabCautions When Handlingz Memory cards are high-precision electronic devices. Do not bend the
107AppendixFormattingz Please note that formatting (initializing) an memory card erases all data, including protected images.z You are recommended to
9Othersz Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight.
108Using Rechargeable Batteries (Battery and Charger Kit CBK4-300)This kit includes a battery charger and four rechargeable AA-size NiMH (nickel metal
109Appendixz Wipe the battery terminals well with a dry cloth in the following situations, as the terminals may be soiled with oil from one’s skin or
110Using the AC Adapter Kit ACK800It is best to power the camera with AC Adapter Kit ACK800 (sold separately) when you are using it for long periods o
111AppendixThe camera supports use of the separately sold Wide Converter WC-DC58N, Tele-converter TC-DC58N and Close-up lens 250D (58mm). In order to
112.Close-up lens 250D (58mm)This lens makes taking macro shots easy. In the normal mode, close-up shots can be taken when the distance from the fron
113AppendixAttaching a Lens1Be sure that the camera is turned off.2Press the ring release button and hold it down, and turn the ring in the direction
1145Align the z mark on the conversion lens adapter with the mark on the camera, and turn the adapter in the direction of the arrows as far as the
115AppendixHigh-Power Flash HF-DC1This flash is used to supplement the camera’s built-in flash when the subject is too far away for proper illuminatio
116Batteriesz Charge becomes Severely LimitedIf the battery usage time has considerably diminished, wipe the battery terminals well with a dry cloth.
117AppendixIf the Date/Time menu appears when the camera power is turned on, the date battery charge is low and the date and time settings have been l
10z When not using the camera for extended periods of time, remove the batteries from the camera or battery charger and store the equipment in a safe
1185 Remove the battery by pulling it up in the direction indicated by the arrow.6 Insert a new battery with the (–) side facing up.7 Replace the batt
119AppendixCamera BodyGently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper.LensFirst use a lens blower brush to remove dust a
120All data is based on Canon’s standard testing methods. Subject to change without notice.PowerShot A700Specifications(W): Max. wide angle (T): Max
121AppendixMetering System : Evaluative, Center-weighted average or Spot**Fixed to center or linked to the AF frameExposure Compensation: ± 2.0 stops
122File Format : Design rule for camera file system and DPOF compliantData Type (Still images) : Exif 2.2 (JPEG)*1Sound memos: WAVE (monaural)(Movies)
123Appendix*1 This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digit
124Battery Capacityz The actual figures will vary according to the shooting conditions and settings.z Movie data is excluded.z At low temperatures, th
125AppendixMemory Cards and Estimated Capacities: Card included with the camera• Capable of smooth continuous shooting (p. 34) (* Only available when
126Movie:Card included with the camera* Maximum movie clip length at : 1 min., at : 3 min. The figures indicate the maximum continuous recording ti
127AppendixImage Data Sizes (Estimated)Recording PixelsCompression2816 x 2112 pixels 2720 KB 1620 KB 780 KB2272 x 1704 pixels 2002 KB 1116 KB 556 KB16
11Preventing MalfunctionsAvoid Strong Magnetic Fieldsz Never place the camera in close proximity to electric motors or other equipment generating stro
128MultiMediaCardSD Memory CardNiMH Battery NB-3AH(Supplied with the separately sold NiMH Battery NB4-300 set or the Battery and Charger Kit CBK4-300)
129AppendixBattery Charger CB-5AH/CB-5AHE(Supplied with the separately sold Battery and Charger Kit CBK4-300)*1When charging four NB-3AH batteries*2Wh
130Tele-converter TC-DC58N (Sold Separately)Close-up Lens 250D 58 mm (Sold Separately))Conversion Lens Adapter LA-DC58G (Sold Separately)(W) : Max. wi
131INDEXAAC Adapter Kit ACK800 ...110AE Lock ...52AF Frame ...16, 48AF Lock ...
132LLandscape ... Basic 5Language ... 27, Basic 3LCD MonitorInformation Displayed ... 16Night Display ...
133TTelephoto ...Basic 8Troubleshooting ...91VVideo Output System ...90WWhite Balance ...
134Trademark Acknowledgments• Macintosh, Mac OS and QuickTime are trademarks of Apple Computer Inc., registered in the United States and/or other coun
135Functions Available in Each Shooting ModeThe following chart shows the functions and settings available in each shooting mode.Function Ref. PageRec
136{ Setting available (z Default setting) Setting can only be selected for the first image (: Default setting).• (Shaded Area): Setting is retain
CEL-SF6L210 © 2006 CANON INC.
12Before Using the Camera – The Components GuideFront ViewaMicrophone (p. 81)bAF-assist Beam (p. 24)cRed-Eye Reduction Lamp (Basic Guide p. 8)dSelf-Ti
13Before Using the Camera – The Components GuideBack ViewaLCD Monitor (p. 15)bViewfinder (p. 19)cWrist Strap MountdMemory Card Slot / Battery Cover Lo
14Operation PanelaIndicators (p. 20)bPower LampcPower Button (Basic Guide p. 4)dZoom Lever (p. 74, Basic Guide p. 8)Shooting: (Wide Angle)/ (Telep
15Before Using the Camera – Basic OperationsBefore Using the Camera – Basic OperationsNight DisplayWhen shooting in dark conditions, the camera automa
16Shooting Information (Shooting Mode)* Appears even if the LCD monitor is set to Standard display.Information Displayed on the LCD MonitorZoom Magnif
17Before Using the Camera – Basic OperationsPlayback Information (Playback Mode)StandardIf the indicator blinks orange and the camera shake warning i
0Main FeaturesShootingz Automatically adjusts shooting settings to match particular conditionsz Avoid the effects of camera shake or blurry subjects w
18DetailedThe following information may also be displayed with some images.A sound file in a format other than the WAVE format is attached or the fil
19Before Using the Camera – Basic OperationsThe viewfinder can be used to conserve power by turning the LCD monitor off (p. 15) while shooting.Histogr
20The camera indicators will light or blink under the following conditions.z Upper Indicatorz Lower IndicatorIndicatorsNever do the following while th
21Before Using the Camera – Basic OperationsThis camera is equipped with a power saving function. The power will shut off in the following circumstanc
22Menus are used to set the shooting, playback and print settings as well as such camera settings as the date/time and electronic beep. The following
23Before Using the Camera – Basic OperationsRec., Play, Print, Set up and My Camera MenusConvenient settings for shooting, playback or printing can be
24FUNC. MenuThe icons shown below are the default settings.Rec. Menu*Default settingMenu ListMenu ItemReference PageMenu ItemReference PageISO Speed p
25Before Using the Camera – Basic OperationsPlay MenuPrint MenuGrid Lines On/Off* You can display grid lines (split into nine) to make it easier to ju
26Set up Menu*Default settingMenu Item Options Reference PageMute On/Off*Set to [On] to silence all operation sounds except for the warning sounds (Ba
27Before Using the Camera – Basic Operations*1The connection method with the printer can be changed. Although it is normally not necessary to change t
1Conventions Used in this GuideIcons appearing below titles indicate the shooting modes in which the procedure can be used.See Functions Available in
28My Camera MenuThe camera's start-up image and start-up sound, operation sounds, self-timer sounds, and shutter sounds are called “My Camera set
29Before Using the Camera – Basic OperationsResetting Settings to Their Default Values1 (Set up) Menu [Reset All].See Menus and Settings (p. 23).2Sele
30You should always format a new memory card or one from which you wish to erase all images and other data.Formatting Memory CardsPlease note that for
31ShootingShootingApproximate Values for Recording PixelsChanging the Recording Pixels and Compression (Still Images)Shooting Mode1FUNC. Menu * (Recor
32Approximate Values for Compression SettingsYou can shoot zoomed images using the combined digital and optical zooms.z Stills: zoom up to approximate
33Shooting2Press the zoom lever toward and shoot.z The combined digital and optical zoom setting will display in the LCD monitor.z When you press th
34In this mode, the camera shoots continuously while the shutter button is held down.If you use the recommended memory card*, you can shoot continuous
35ShootingYou can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately
36Embedding the Date in the Image DataYou can embed the date in image data when (Postcard Date Imprint Mode) is selected.1 (Rec.) Menu [Date Stamp]
37ShootingYou can set a 10 sec. ( ) or 2 sec. ( ) delay, or a custom delay time and the number of shots ( Custom Timer), for shooting after the shutt
2Table of ContentsItems marked with a are lists or charts that summarize camera functions or procedures.Handling Precautions . . . . . . . . . . .
38Changing the Delay Time and Number of Shots ()1.See Menus and Settings (p. 22).2Change [Delay]/[Shots] .z The self-timer sound will behave as follow
39ShootingThe following movie modes are available.For information on the recording pixels and frame rate in each mode, refer to “Recording Pixels and
401Select a movie mode using the or button.z In , or mode, you can change the recording pixels and frame rate (p. 41).z For and mode proced
41ShootingQuickTime 3.0 or later is required to play back movies (Data type: AVI/Compression method: Motion JPEG) on a computer. QuickTime (for Window
42Recording Pixels and Frame RatesFrame rates indicate the number of frames recorded or played back each second. The higher the frame rate, the smooth
43ShootingStitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. Shoot
44The camera automatically sets the shutter speed and aperture value to match the brightness of the subject.zWhen a correct exposure cannot be obtaine
45ShootingWhen you set the shutter speed, the camera automatically selects an aperture value to match the brightness of the subject. Faster shutter sp
46The aperture adjusts the amount of light entering through the lens. When you set the aperture value, the camera automatically selects a shutter spee
47ShootingYou can manually set the shutter speed and aperture to shoot images.z When you press the shutter button halfway, the difference between the
3Locking the Exposure Setting (AE Lock). . . . . . . . . . . . . . . . .52Locking the Flash Exposure Setting (FE Lock) . . . . . . . . . . . .53Switch
48The AF frame indicates the area of the composition on which the camera focuses. You can set the AF frame in the following ways.Selecting an AF Frame
49ShootingSelecting an AF Frame Manually(when [FlexiZone] is selected)1Turn on the LCD monitor2Press the button several times until the AF frame tur
50It may be difficult to focus on the following types of subjects.z Subjects with extremely low contrast to the surroundingsz Scenes with a mixture of
51ShootingTo Release the AF LockPress the button.Shooting in Manual Focus ModeThe focus can be manually set.4Re-aim the camera to compose the shot a
52To Cancel the Manual FocusPress the button.You can set the exposure and focus separately. This is effective when the contrast is too strong betwee
53ShootingTo Release the AE LockOperate a button other than the or button.You can lock the flash exposure so that the exposure settings are correc
54Metering MethodsSwitching between Metering ModesShooting Mode1FUNC. Menu * (Evaluative)See Menus and Settings (p. 22).* Default setting.z Use the
55ShootingMove the spot AE point to the same position as the selected AF frame/Lock the spot AE point to the center of the LCD monitor1 (Rec.) Menu [S
56Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid mak
57ShootingNormally, the (Auto) white balance setting selects an optimal white balance. When the (Auto) setting cannot produce natural looking colo
4List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
58Using the Custom White BalanceYou can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera eval
59Shootingz You are recommended to set the shooting mode to and the exposure compensation setting to [±0] before setting a custom white balance.The
60You can change the impression of an image when it is shot.My Colors SettingsShooting in a My Colors ModeShooting Mode1FUNC. Menu * (My Colors Off).S
61Shooting* The skin colors of non-human subjects may also be altered.* You may not obtain the expected results depending on the skin color.Darker Ski
62Allows you to easily transform the colors in an image when shooting. This feature can be used for both still shots and movies, and offers you the en
63ShootingShooting in the Color Accent Mode1Still image: or button Movie: or button See Selecting a Shooting Mode in Basic Guide (p. 5)2z The
64Shooting in the Color Swap Mode1Still image: or button Movie: or button See Selecting a Shooting Mode in Basic Guide (p. 5)2z The camera wil
65Shooting3Aim the camera so that the original color appears at the center of the LCD monitor and press the button.z Only one color can be specified
66Changing the Save Method for the Original ImageWhen shooting still images in the Color Accent or Color Swap mode, you can specify whether to record
67ShootingRaise the ISO speed to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the
5Handling PrecautionsTest ShotsBefore you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm tha
68Compensating the FlashAdjustment / Flash OutputShooting Mode+/– (Flash) (Flash Exposure Compensation)z When the shooting mode is set to , , , ,
69ShootingYour camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically
70You can create a new folder at any time and the recorded images will be automatically saved to that folder.z When the camera is held vertically to s
71ShootingCreating a Folder the Next Time You Shoot.Setting the Day or Time for Automatic Folder Creation.2Use the or button to check mark [Create
72The images you shoot are automatically assigned file numbers. You can select how the file number is assigned.File Number Reset Function* When a blan
73ShootingFile and Folder NumbersRecorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are as
74Playback/ErasingPlease also see the Basic Camera User Guide (p. 11).To Cancel the Magnified DisplayPress the zoom lever toward . (You can also canc
75Playback/ErasingTo Return to Single Image PlaybackPress the zoom lever toward . Viewing Images in Sets of Nine (Index Playback)1Press the zoom leve
76When you have many images recorded onto a memory card, it is handy to use the five search keys below to jump over images to find the object of your
77Playback/ErasingOperating the Movie Control PanelViewing MoviesMovies cannot be played in the index playback mode.1Display a movie and press .z Imag
6Video FormatPlease set the camera’s video signal format to the one used in your region before using it with a TV monitor (p. 90).Language SettingPlea
78You can delete portions of recorded movies.z Use the television’s controls to adjust the volume when playing a movie on a TV set (p. 90).z The sound
79Playback/Erasing4Select [New File] or [Overwrite] and press .z [New File] saves the edited movie under a new file name. The pre-edit data is left u
80Images can be rotated clockwise 90° or 270° in the display.Rotating Images in the Display1 (Play) Menu .See Menus and Settings (p. 23).2Use the or
81Playback/ErasingIn playback mode (including single image playback and index playback), you can attach sound memos (up to 1 min.) to an image. The so
82Sound Memo PanelUse this feature to automatically play back all of the images in the memory card. The LCD monitor displays each image for approximat
83Playback/ErasingYou can protect important images and movies from accidental erasure.Protecting Images1 (Play) Menu .See Menus and Settings (p. 23).2
84Erasing All Imagesz Note that erased images cannot be recovered. Exercise adequate caution before erasing an image.z Protected images cannot be eras
85Print Settings/Transfer SettingsPrint Settings/Transfer SettingsYou can select images on a memory card for printing and specify the number of print
86All the Images on a Memory Card2Use the or button to select images for printing.z Selection methods differ for the Print Type settings (p. 87).-
87Print Settings/Transfer SettingsSetting the Print StyleAfter setting the print style, select the images for printing. The following settings can be
7 WarningsEquipmentz Do not look directly into the sun or at bright light sources through the camera's viewfinder.Doing so can damage your eyesig
88You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how
89Print Settings/Transfer SettingsSingle ImagesAll the Images on a Memory Card2Select [Order] and press .z Selecting [Reset] cancels all transfer ord
90Viewing Images on a TV setYou can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera wit
91TroubleshootingTroubleshootingCameraCamera will not operate.Power is not turned on. z Press the power button (Basic Guide p. 4).Memory card slot/bat
92The Date/Time menu appears.The lithium date/time battery charge is depleted.zReplace the lithium date/time battery (p. 117).LCD monitorThe display d
93Troubleshooting appears.This displays when using a memory card that has print settings or transfer settings set by other DPOF-compliant cameras.z Th
94Image Seen in Viewfinder vs. Recorded ImageUsually the recorded image contains more of the scene than is seen in the viewfinder.zConfirm the actual
95TroubleshootingSubject in recorded image is too bright, or image flashes white.Subject is too close, making the flash too strong.z Shoot within corr
96Eyes appear red.Light is reflected back from the eyes when the flash is used in dark areas.z Use the (red-eye reduction) mode (Basic Guide p. 8).
97TroubleshootingShooting MoviesThe recording time may not display properly or filming may stop unexpectedly.The following types of memory cards are u
Comments to this Manuals