How the Shutter Button Works
The shutter button has two stages, You can press it down halfway or fully The
two levels of shutter button operation are as follows:
When it is pressed halfway:
• Pressing the shutter button down halfway
activates autofocusing (AF), and also
activates the automatic exposure (AE)
mechanism and sets the shutter speed
and aperture value.
• The exposure (the combination of shutter
speed and aperture value) appears on the
LCD panel and in the viewfinder ((?)4).
When it is pressed fully:
• The shutter is released to take the picture
and the film advances by one frame,
If an Extender (optional) is used and the ma)dmum ^^erture (the lowest
f/number) of the lens becomes smaller than f/5.6, autcrfocusing will not operate.
For details, refer to the extender’s instructbns,
FJ Camera mov^nent during the moment of exposure is called camera shake.
Camera shake can cause blurred pictures. To prevent blurred pictures due to
camera shake:
• Hold the camera steady.
* Rrmly grasp the camera grip with your right hand, and press your both
elbov^ lightty against your body.
* Hold the lens at the bottom with your left hand
V Press the c^nera against your face and look through the viewfinder
* To maintan a stable starve, place one foot in front of the other instead of
lining up bcth feel
• Use your finger tip to touch the shutter button, grasp the camera with your
entire right hand, then press the shutter button gentiy.
14
Comments to this Manuals