Canon PIXMA TS6051 User Manual download pdf (Page 316)

1. Select System Preferences from Apple menu, and then click Network.

2. Make sure network interface used by computer is selected, and then click Advanced.

Make sure Wi-Fi is selected as network interface.

3. Check the IP address or MAC address.

Click TCP/IP to check the IP address.

Click Hardware to check the MAC address.

Checking Communication Between the Computer, the Printer, and the

Wireless Router

Perform a ping test to check if communication is taking place.

• For Windows:

1. Select Command Prompt as shown below.

In Windows 10, right-click Start button and select Command Prompt.

In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command

Prompt is not displayed on the Start screen, select the Search charm and search for

"Command Prompt".

In Windows 7 or Windows Vista, click Start > All Programs > Accessories > Command

Prompt.

2. Type the ping command and press Enter.

The ping command is as follows: ping XXX.XXX.XXX.XXX

"XXX.XXX.XXX.XXX" is the IP address of the target device.

If communication is taking place, a message like the one shown below appears.

Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255

If Request timed out appears, communication is not taking place.

• For Mac OS:

1. Start Network Utility as shown below.

In Mac OS X v10.11, Mac OS X v10.10 or Mac OS X v10.9, select Computer from Go menu of

Finder, double-click Macintosh HD > System > Library > CoreServices > Applications >

Network Utility.

In Mac OS X v10.8, open Utilities folder in Applications folder, then double-click Network

Utility.

2. Click Ping.

3. Make sure Send only XX pings (XX are numbers) is selected.

4. Enter IP address of target printer or target wireless router in Enter the network address to ping.

5. Click Ping.

319

1 2 ... 311 312 313 314 315 316 317 318 319 320 321 ... 403 404

No comments

Canon PIXMA TS6051 User Manual Page 316