Canon VB-C300 User Manual download pdf (Page 15)

1-9

Detailed Settings

▼ Camera Settings

1 Shutter Speed

Select the shutter speed for the camera. NTSC: “Auto”, “1/60”, and “1/100”. PAL: “Auto”, “1/

50”, and “1/120”.

2 Focus Mode

Set the focusing mode for the camera.

Auto: Adjust the focus automatically.

Auto (for domes): When the indoor dome housing (optional) is used, select this mode

not to allow the camera to focus on the surface of the dome.

Fixed at infinity: Focus is fixed at a point of infinity.

Setting Image Size, Quality and Camera Control (Video and Camera)

Note

If you are using the indoor dome housing other than optional dome housing (VB-

RD41S - C/S) and dust or water drop exists on the surface of the dome, the camera

may focus on the dome surface. Be sure to install the camera so that the distance

between the dome and camera may be as short as possible.

Note

● The shutter speeds of 1/60 and 1/100 can be used to suppress flicker of fluorescent

lamp. If video view flicks too much, use “NTSC: 1/100 PAL: 1/120” in the place

where commercial frequency is 50 Hz and “NTSC: 1/60 PAL: 1/50” in the place

where commercial frequency is 60 Hz. Note that even when one of these shutter

speeds is selected, the camera automatically shifts to a higher shutter speed if the

exposure is too high with these values.

● Please refer to P.1-8 in the “Start Guide” to confirm whether your VB-C300 is

NTSC model or PAL model.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 94 95

No comments

Canon VB-C300 User Manual Page 15