Canon R-F10 Specifications download pdf (Page 29)

– 17 –

4.2 Measurement in FULL AUTO Mode

Move measurement head toward the other eye

If “R–L MEASURE” is set to “ON” in SET mode (→ section 6.1), the measurement

head automatically moves to the other eye.

If the setting is “

OFF”, press the R/L switch.

Alignment and measurement of the other eye are performed

Alignment and measurement are

performed automatically in the same

way as measuring the right eye is

done when the pupil of the left eye

has been detected.

After both eyes are measured, pupil

distance (PD) will be displayed.

The result is printed out

If “PRINT” and “AUTO PRINT” are set to “ON” in SET mode (→ section 6.1), the

result will be printed out automatically after both eyes are measured.

If the setting is “OFF”, press PRINT switch.

– Result will disappear from the monitor. However, it is saved in memory and can be

referred to on the DISPLAY mode screen and/or can be printed out again until the

next measurement is performed.

– If “TRANS” is set to “ON”(→ section 6.2):

Measurement data will be transferred to external instrument.

– If “COUNT” is set to “ON”(→ section 6.1):

Serial number will count up after data is printed/transferred.

NOTES: 1. Results will be deleted from memory at the measurement after printing/

transfer is performed.

2. It is recommended that a hard copy of the printout be made if you wish to

store it for a long time, because printouts on thermal paper are apt to

deteriorate.

PD: 67 VD:13.5 No. 00001

FULL AUTO(3)

LEFT SPH CYL AX

1: -0.62 0.00 180

2: -0.75 0.00 180

3: -0.75 0.00 180

[ -0.75 0.00 180 ]

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 69 70

No comments

Canon R-F10 Specifications Page 29