7.1 Settings for Measurement (Page: 1/3)
– 34 –
COUNT Choosing whether to display the serial number on the monitor and
print it out with the result
“
ON”: Serial number will be displayed on the monitor and
printed/transferred with the result. It counts up after
data is printed/transferred or deleted.
“
OFF”: Serial number will neither be displayed nor printed.
ERROR Choosing whether to count up the serial number when all the mea-
surements result in error. “
COUNT” must be set to “ON” in order to
choose “
ON”.
“
ON”: Even when all the measurements result in error, header
(name of the instrument, date, etc.) will be printed and
serial number will count up by pressing the
PRINT
switch.
“
OFF”: When all the measurements result in error, “NO PRINT
DATA
” will be displayed on the monitor, nothing will
be printed and serial number will not count up even if
PRINT switch is pressed.
[No.] “6-digit number”: Serial number
[How to change the number]
(1) Turn the roller, or press FIXATION switch or LIMITER switch to
select the digit. The number of the selected digit will be dis-
played in reverse image.
(2) The number increases when
PRINT switch is pressed, and
decreases when
START switch is pressed.
“6-digit number”: Serial number
[How to change the number]
(1) Turn the roller, or press FIXATION switch or LIMITER switch to
select “
RESET”.
(2) Press
START switch or PRINT switch.
ORDER Order of displaying the result
“
SEQU”: The newest three measurements will be displayed in
measurement mode, or the newest 10 measurements in
DISPLAY mode. When “
SEQU” is selected, it will be
displayed as “ ” mark on the measurement mode dis-
play.
“
RELI”: The three measurements of the highest reliability will
be displayed in measurement mode, or the newest 10
measurements in DISPLAY mode. When “
RELI” is
selected, it will be displayed as “ ”mark on the mea-
surement mode display.
DATE Date and time
“
01” - “31”: Day
Comments to this Manuals