Canon MF8100 Series Specifications download pdf (Page 8)

- 8 -

Load paper.

13Close the cartridge cover and wait for the

cartridge cradle to rotate and stop, and then

open the cover again. Allow approximately

two seconds for the cartridge cradle to

rotate to the next receptacle.

The receptacles appear in this order: Yellow

> Magenta > Cyan > BlacK.

15Close the cartridge cover and lower the

scanning platform.The LCD flashes PLEASE

WAIT until calibration is complete. Please

allow a few minutes for the machine to

calibrate itself.

14Repeat steps 8 to 13 until all four toner

cartridges are installed.

●

For each cartridge, match the color marking on the

cartridge receptacle in the machine to the color

marking on the cartridge itself.

1 Grasp paper cassette, pull it out completely,

and set it aside.

2 Turn and pull out the shipping material, and

press the inner plate to set it on the bottom.

NOTE

●

If the cartridge cover is closed during those steps or

the spent toner cartridge is not in the replacement

position, close the cover, then open it again when the

whirring sound stops. Repeat this process until the

cartridge you want to replace is in the correct

position.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

No comments

Canon MF8100 Series Specifications Page 8