Canon BJC-6000 Technical Information download pdf (Page 19)

2. MACHINE PRECAUTIONS

2.1 BJ Cartridges

2.1.1 BJ cartridge handling

Do not unpack the BJ cartridge until you are ready to use it. Before installing the BJ

cartridge in the printer, carefully remove the head cap which protects the nozzles, the

protective tape, and the protective tank. To prevent the nozzles or other ink paths

from clogging, never touch or wipe the nozzles or other ink outlets with your bare

hands or tissue paper. After removing the head cap, the protective tape, and the

protective tank from a BJ cartridge, promptly install the cartridge in the printer or

store it in the cartridge container. Do not reuse head caps or protective tapes which

have been removed. The BJ cartridge must be installed in the printer or stored in the

cartridge container with its ink tanks installed. If the BJ cartridge is installed or

stored with its ink tanks removed, the nozzles could clog due to foreign matter or

dried ink. Do not attempt to disassemble or wash the BJ cartridge.

If a nozzle clogs, or ink fails to be fed normally, print quality degrades, and

typically a fine horizontal blank line appears in printed images. If cleaning

operations do not solve the problem, replace the BJ cartridge with a new

one.

1-5

BJC-6000

Part 1: Safety and Precautions

Protective Tape

Head Cap

Figure 1-5 BJ Cartridges

NOTE

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 173 174

No comments

Canon BJC-6000 Technical Information Page 19