Canon IP4200 User Manual download pdf (Page 6)

4、Refill Ink

Please pay attention to the ink level in the reservoirs; if the ink level is below 1CM as the above picture shown,

please use refill kits to fill ink into Reservoir bottles. Carefully pull out the rubber plugs from the refill holes.(there is

possibility of ink spattering. Be careful!) Refill ink according to the color in short supply. Then put the rubber back.

(Please keep the printer and the reservoir at the same horizontal line during the process of refilling ink.)

5. Attention for Maintenance:

Take out the CISS including the inner cartridges and other components. Then remove support arm from printer, and

re-install original cartridges. Please inquire local dealer before sending to maintenance.

6. Notice:

1. Please don’t take out cartridge at random after installing the CIS system. Keep the reservoir bottles on the same

level with the printer.

2. Try to keep at least 1/2 inch of ink in the bottles.

3. Don’t place the Reservoir Bottles too much higher or lower than the printer.

4. Suggested using in a dry place between 15 and 35 degree. Avoid exposure to direct sunlight.

5. Don’t reverse or lean the continuous ink supply systems during shipping. Please make sure all the ink filling holes

and ventilation holes are closed tightly during transportation. Otherwise, the ink may leak.

6. Don’t sway the cartridge frequently. It may cause ink leakage.

7. Don’t pull out the connector of cartridge and don’t tear off adhesive tape at the bottom of cartridge.

7. Warning:

1. Not drinkable; keep it out reach of children.

2. Avoid exposure to direct sunshine and don’t keep it in high or freezing temperature.

3. Avoid collision and fallen down.

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

1 2 3 4 5 6

No comments

Canon IP4200 User Manual Page 6