Canon PIXMA MG2550S User Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 403
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
Cleaning the Print Head Deeply
If print quality does not improve by the standard cleaning of the print head, clean the print
head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning
of the print head, so clean the print head deeply only when necessary.
1. Make sure that the power is turned on.
2. Hold down the Stop button until the Alarm lamp flashes orange three
times, then release it immediately.
The machine starts cleaning the print head deeply.
The cleaning will be complete when the ON lamp lights green after flashing.
Do not perform any other operations until the machine completes the deep cleaning of
the print head. This takes about 1 minute.
3. Check the print head condition.
To check the print head condition, print the nozzle check pattern.
Printing the Nozzle Check Pattern
If the problem is not resolved, turn off the power and clean the print head deeply again after
24 hours.
If the problem is still not resolved, replace the FINE cartridge with a new one.
Replacing a FINE Cartridge
If the problem is still not resolved after replacing the FINE cartridge, contact the service
center.
79
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 402 403

Comments to this Manuals

No comments