Canon S330 User Manual Page 79
- Page / 199
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
How Low Ink Warning Setting Works
79
Routine Maintenance
Macintosh
Note
➤ When background printing is enabled, the low ink warning displays on the
BJ Print Monitor (Macintosh).
➡
BJ Print Monitor
■ How to Display Low Ink Warning Correctly
• Reset the ink counter every time you install a new ink tank.
The ink counter is only accurate when synchronized with the actual ink level.
To synchronize the counter with the actual ink level, the ink counter must be set only
immediately after installing a new ink tank.
• Do not reset the ink counter for an ink tank in use.
This would disrupt synchronization between the counter and the actual ink level.
Note
➤ • Ink counters for black and color ink tanks work independently of each
other. However, both start counting at the time you enable the low ink
warning. If you did not reset the counter for a specific ink tank when it was
first installed, the low ink warning may not function correctly for that tank.
Do not reset the ink counter until you install a new ink tank. Also note that
the counter for each ink tank must be started separately.
• Refer to "Low Ink Warning Displays Ink Tank with '?'" if the ink tanks and
counters are not synchronized.
- User’s Guide 1
- Table of Contents 2
- Introduction 5
- How to Use This Manual 6
- Safety Precautions 8
- ■ Cleaning the printer 9
- ■ Maintaining the printer 10
- ■ Working around the printer 10
- ■ Choosing a location 11
- ■ Power supply 12
- ■ Print heads and ink tanks 13
- • Front View 14
- • Rear View 14
- • Inside the Printer 14
- • Operation Panel 14
- Front View 15
- Rear View 16
- Inside the Printer 17
- Operation Panel 18
- • BJ Status Monitor Functions 19
- • Canceling a Print Job 19
- Main Tab 23
- Page Setup Tab 25
- Stamp/Background Tab 28
- Effects Tab 30
- Profiles Tab 32
- Maintenance Tab 34
- (11) Start Status Monitor 36
- BJ Status Monitor Functions 37
- Status Monitor 38
- ■ When errors occur 39
- Canceling a Print Job 40
- 2 Click Cancel Printing 40
- Uninstalling Printer Drivers 41
- • BJ Print Monitor 42
- Description of Print Settings 43
- Page Setup Dialog Box 44
- Printer Utility Dialog Box 46
- Print Dialog Box 48
- Detailed Setting Dialog Box 50
- ■ Special Effects Panel 52
- ■ Color Panel 54
- Options Dialog Box 56
- Register Settings Dialog Box 58
- BJ Print Monitor 59
- 2 Set Backgrounding to On 59
- ■ BJ Print Monitor Functions 60
- 2 Select Active in AppleTalk 62
- ■ Checking Print Status 64
- ■ BJ Status Monitor Functions 65
- Routine Maintenance 67
- Replacing an Ink Tank 69
- 2 Remove the empty ink tank 70
- Important 71
- 6 Close the front cover 73
- Resetting the Ink Counter 74
- ■ What is Low Ink Warning? 77
- ■ Low Ink Warning Display 78
- ■ Setting Low Ink Warning 80
- Print Head Cleaning 86
- 1 Ensure the printer is on 88
- Print Head Deep Cleaning 89
- 5 Click OK 90
- Transporting the Printer 91
- 1 Turn the printer off 91
- • T-Shirt Transfers 96
- • Banner Paper 96
- Compatible Media Types 97
- ■ Weight 98
- ■ Ty pes 98
- Envelopes 100
- ■ Unsuitable Envelopes 101
- ■ Loading 102
- ■ Printer Driver Settings 103
- ■ Handling of Printed Output 103
- ■ Printable Area 103
- High Resolution Paper 104
- Glossy Photo Paper 106
- High Gloss Photo Film 108
- Glossy Photo Cards 110
- Photo Paper Pro 112
- ■ Storing Printed Output 113
- Photo Paper Plus Glossy 117
- Matte Photo Paper 120
- Transparencies 122
- T-Shirt Transfers 124
- Banner Paper 126
- Printing Media 127
- Troubleshooting 129
- Cannot Print to End of Job 133
- Colors are Unclear 134
- Straight Lines are Misaligned 137
- 2 Click the Maintenance tab 137
- 3 Click Print Head Alignment 137
- 2 Click Utilities 138
- 1 Open the Print dialog box 139
- Back of Paper is Smudged 142
- Macintosh 143
- Printed Surface is Scratched 144
- White Streaks 147
- • Printing Does Not Start 150
- Printing Does Not Start 151
- 2 Select the Canon S330 icon 152
- • Paper Jams 156
- Paper Does Not Feed Properly 157
- Paper Jams 159
- The POWER Lamp Flashes Orange 160
- • Error Writing to USBxxx 163
- • Other Error Messages 163
- Error Writing to USBxxx 164
- Other Error Messages 169
- Displayed 172
- Problems Unique to Windows 176
- • Cannot Print in Background 179
- Cannot Print in Background 181
- 2 Click Backgrounding on 181
- Specifications 182
- ■ Feed method: 185
- ■ Sheet feeder capacity: 185
- ■ Ordinary print media: 186
- ■ Graphic image printing: 187
- ■ Print Head: 187
- ■ Ink Tanks: 187
- ■ Hard disk space: 188
- ■ Printing Area 189
- Recommended printing area 191
- Printable area 191
- 1.04 in 192
- 0.25 in. 0.25 in 192
- 0.12 in 192
- × 65.7 in. (203.2 × 1668.4 194
Related products and manuals for Print & Scan Canon S330
Print & Scan Canon PIXMA K10335 User Manual
(36 pages)
(36 pages)
Print & Scan Canon S630 Quick Start Manual
(26 pages)
(26 pages)
(16 pages)
(16 pages)
Print & Scan Canon C2225 Owner's Manual
(56 pages)
(56 pages)
Print & Scan Canon K10158 User Manual
(14 pages)
(14 pages)
Print & Scan Canon BJC-6000 Owner's Manual
(10 pages)
(10 pages)
Print & Scan Canon EOS-1Ds Brochure
(39 pages)
(39 pages)
Print & Scan Canon FB330P/FB630P User Manual
(82 pages)
(82 pages)
Print & Scan Canon IXUS 860 IS User Manual
(234 pages)
(234 pages)
Print & Scan Canon PowerShot D30 User Manual
(153 pages)
(153 pages)
© 2020, manymanuals.com. All rights reserved. | 1.237 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals