Canon AXIS 1610 User Manual download pdf (Page 19)

AXIS 1610 User’s Manual Section 3: Installation

Using ARP in

Windows 95/98, ME

& Windows NT, 2000

Follow the instructions below to set the IP address using ARP:

Start a DOS window.

Type the following commands:

Example

The host will return

Reply from 192.168.3.191 ... or a

similar message. This indicates that the address has been set and

that the communication is established.

Notes:

❏ When using the Windows 95 implementation of ARP, change the

first line to:

arp -s <IP address> <Ethernet address> <w95host IP

address>

, where <w95host IP address> is the IP address of

your Windows 95 host.

❏ When you execute the ping command for the first time, you will

experience a significantly longer response time than usual

❏

By using the arp -d command, the static entry in the arp table is

removed from the cache memory of the host.

arp -s <IP address> <Ethernet address>

ping <IP address>

arp -d <IP address>

arp -s 192.168.3.191 00-40-8c-10-00-86

ping 192.168.3.191

arp -d 192.168.3.191

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 56 57

No comments

Canon AXIS 1610 User Manual Page 19