Canon i 860 User Manual download pdf (Page 3)

and the other empty. There’s a transit space between the

two spaces for the ink to move from the empty space (a

reservoir) to the foam filled space. The computer uses

infra red technology to read the tanks and can report the

amount of ink remaining to you using the software “setup

utility). Another nice feature is the fact that the tanks are

clear plastic, so you can find out how low the ink is just by

taking out the tanks and looking at them.

Important: Don’t confuse the two black tanks! The large

tank “BK3e” is pigmented ink. It’s used primarily for text.

The smaller black tank “BK6” is dye based and is used for

photo. Don’t put pigmented ink into the small tank--it won’t

work! You may wind up buying a new cartridge!!!

HERE WE GO!!!

First, have the syringe laying down in front of you already

filled with the ink of choice, your rubber gloves on, paper

down on the table, and a sink nearby. You’ll need to

carefully clean the syringe after each fill in order to prevent

cross contamination. Have the drill handy to pick up with

the drill inserted. Have the glue gun hot and ready to go.

METHOD

You’ll need to drill two holes, one in each of these spaces,

on the top of each. Drill the first above the foam filled area

and slightly down into the foam to be sure there’s a clear

1 2 3 4 5

No comments

Canon i 860 User Manual Page 3