Canon imagePROGRAF iPF8400S User Manual Page 148
- Page / 160
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
iPF8400S Basic Guide
148
Error Message Messages regarding printing or adjustment
Cause Corrective Action
the supported width for borderless printing. environmental conditions are met. For details on
environmental conditions for various paper, see the Paper
Reference Guide.
(See "Paper Reference Guide.")
Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side opposite
●
when a borderless print job was received.
Before borderless printing, set the blue Switch on the platen
to the
●
side.
(See "Setting the Blue Switch on the Platen.")
➔
P.119
Blue platen switch is dirty.
Cause Corrective Action
The blue Switch on the platen is dirty. Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.")
➔
P.56
Move the blue platen switch No.xx to the right. (xx represents a number)
Cause Corrective Action
The printer has detected that the blue Switch on the platen
needed in maintenance during printing is set away from the
●
mark.
Set blue platen Switch of the indicated number toward the
●
side.
(See "Setting the Blue Switch on the Platen.")
➔
P.119
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged.
Execute
Adj. Quality
again, as follows.
1. Press the
OK
button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
➔
User's Guide
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
➔
P.58
4. Execute
Adj. Quality
again.
(See "Automatic Banding Adjustment.")
➔
P.100
Highly transparent film is loaded that cannot be used for
automatic feed amount adjustment.
Press the
OK
button to clear the error, and then adjust the
feed amount manually.
(See "Manual Banding Adjustment.")
➔
User's Guide
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.")
➔
P.58
- Basic Guide 1
- Preface 2
- Power Supply 3
- In an Emergency 3
- Cleaning the Printer 3
- Pacemakers 3
- Moving the Printer 4
- Legal Notices 5
- Copyright 6
- Legal Notice 6
- Manuals for this printer 7
- About This User Manual 10
- iPF8400S Basic Guide 11
- Handling Paper 12
- Loading Rolls in the Printer 14
- Handling sheets 21
- Removing Sheets 24
- Handling Pape 25
- Consumables and Maintenance 26
- How to replace an Ink Tank 27
- Confirm the message 27
- Remove the Ink Tank (330 ml) 28
- Remove the Ink Tank (700 ml) 30
- Load the Ink Tank (330 ml) 31
- Load the Ink Tank (700 ml) 33
- Printheads 37
- Replace the Printhead 39
- Cutter Unit 45
- Replacing the Cutter Unit 46
- Maintenance Cartridge 49
- Replacing the Shaft Cleaner 53
- Cleaning the Printhead 58
- Printer Parts 60
- Menu Operations 61
- Accessing menus 62
- Specifying menu items 63
- Specifying numerical values 63
- Menu Structure 64
- Ink Menu 65
- Job Menu 65
- Set./Adj. Menu 66
- Printer parts 70
- Printer Parts Printer parts 71
- Top Cover (Inside) 72
- Carriage 73
- Ink Tank Cover (Inside) 74
- Printer Relocation 76
- Removing Ink Tanks 78
- Pack the printer 80
- Reinstalling the Printer 82
- Caution 83
- Software Installation 86
- Supported connection methods 88
- Installing the software 88
- After installation, click 89
- Print Preview 90
- Borderless Printing 92
- Large-Format Printing 93
- Enlarged/Reduced Printing 94
- Adjusting the Printhead 97
- Adjusting the feed amount 99
- Automatic Banding Adjustment 100
- Troubleshooting 102
- Clearing a Jammed Sheet 105
- Important 106
- Cannot load sheets 107
- Paper is not cut straight 107
- Paper is not cut 108
- Margins are wide 109
- Cause Corrective Action 110
- Printing does not start 111
- Printing is faint 113
- Number Dimensions 121
- Images are printed crooked 123
- Cannot print over a network 125
- Installation problems 127
- Other problems 129
- Ink Level Detection 130
- Error Message 133
- The paper is too small 134
- PaprWidth Mismatch 135
- Paper size not detected 136
- Insufficient paper for job 136
- Roll printing is selected 137
- The roll is empty 138
- No sheets 139
- Sheet printing is selected 139
- Paper jam 139
- Paper loaded askew 140
- Cannot detect papr 140
- Cannot feed paper 140
- Cannot cut this paper 141
- End of paper feed 141
- Rewinding error 142
- Media take-up unit ready 142
- Messages regarding ink 144
- Ink tank is empty 145
- Not much ink is left 145
- No ink tank loaded 145
- Cannot calibrate 146
- Blue platen switch is dirty 148
- Cannot adjust paper feed 148
- Check printed document 148
- Cannot adjust printhead 149
- PHeads: wrong pos 149
- Execute printhead cleaning 150
- Other Messages 154
- Error Messages 156
- Error Message Error Messages 157
Related products and manuals for Printers Canon imagePROGRAF iPF8400S
Printers Canon imagePROGRAF iPF655 User Manual
(948 pages)
(948 pages)
Printers Canon Océ CS9350 User Manual
(2 pages)
(2 pages)
Printers Canon PIXMA MX725 User Manual
(4 pages)
(4 pages)
Printers Canon PIXMA MX525 User Manual
(20 pages)
(20 pages)
© 2020, manymanuals.com. All rights reserved. | 3.241 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals