Canon DR-2080C Owner's Manual download pdf (Page 68)

66 Troubleshooting

Cause The scanner’s SCSI ID is identical to the SCSI ID of

another device.

Action Check the SCSI IDs of all SCSI devices connected to the system

and set a unique SCSI ID for the scanner.

Cause The terminator is not set correctly.

Action Turn the PC and the scanner off once. Then, turn the scanner on

first and the PC on again. (→ P.26)

Cause The PC was turned on before the scanner.

Action Shut down both the PC and the scanner, and then turn the scanner

back on, followed by the PC.

Cause The scanner is not on.

Action Refer to the previous section, “The scanner does not turn on,”

and check to see if the scanner is on. If the scanner is not on, shut

down the PC, then turn the scanner on first, and then the PC.

Cause The SCSI board is not compatible with the scanner.

Action Use a recommended SCSI board. (→ P.23)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 74 75 76

No comments

Canon DR-2080C Owner's Manual Page 68