Canon EOS 750D User Manual download pdf (Page 118)

118

Four methods (metering modes) to measure the subject’s brightness

are provided. Normally, evaluative metering is recommended.

In Basic Zone modes, metering mode is set automatically.

Select [Metering mode].

 Under the [z2] tab, select [Metering

mode], then press <0>.

Set the metering mode.

 Select the desired metering mode,

then press <0>.

q Evaluative metering

General-purpose metering mode suited even

for backlit subjects. The camera sets the

exposure automatically to suit the scene.

w Partial metering

Effective where there are much brighter lights

around the subject due to backlight, etc. The gray

area in the left figure is where the brightness is

metered to obtain the standard exposure.

r Spot metering

Effective when metering a specific part of the

subject or scene. The gray area in the left figure

is where the brightness is metered to obtain the

standard exposure. This metering mode is for

advanced users.

e Center-weighted average metering

The brightness is metered at the image center

and then averaged for the entire scene. This

metering mode is for advanced users.

q Changing the Metering ModeK

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 207 208

No comments

Canon EOS 750D User Manual Page 118