Canon EOS 750D User Manual Page 327

  • Download
  • Add to my manuals
  • Print
  • Page
    / 412
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 326
327
w Printing
You can crop the image and print only an
enlarged version of the cropped portion,
as if the image is recomposed.
Set the cropping right before printing.
If you change the print settings after
setting the cropping, you may have to set
the cropping again before printing.
1 On the print setting screen, select [Cropping].
2 Set the cropping frame size, position, and aspect ratio.
The image area within the cropping frame will be printed. The
cropping frame’s aspect ratio can be changed with [
Paper settings
].
Changing the Cropping Frame Size
Press the <u> or <I> button to change the cropping frame
size. The smaller the cropping frame, the larger the image
magnification will be for printing.
Moving the Cropping Frame
Press the <S> cross keys to move the frame over the image
vertically or horizontally. Move the cropping frame until it covers
the desired image area.
Switching the Orientations of the Cropping Frame
Pressing the <B> button will toggle the cropping frame
between the vertical and horizontal orientations. This enables you
to create a vertically oriented print from a horizontal image.
Image Tilt Correction
By turning the <6> dial, you can adjust the image tilt angle up to
±10 degrees in 0.5-degree increments. When you adjust the
image tilt, the <O> icon on the screen will turn blue.
3 Press <0> to exit the cropping.
The print setting screen will reappear.
You can check the cropped image area on the upper left of the print setting screen.
Cropping the Image
Tilt correction
Page view 326
1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 411 412

Comments to this Manuals

No comments