Canon Powershot S80 User Manual download pdf (Page 74)

Changing the Photo Effect

By setting a photo effect before you shoot, you can change the look and

feel of the pictures you take.

- The zoom is positioned to the maximum telephoto setting.

Set the digital zoom to [Off].

- Set the flash according to shooting conditions, and select

(Flash On) or (Flash Off)

Use the same flash setting as the one that will be used for shooting

when you set the white balance. If the white balance setting

conditions and shooting conditions are not the same, the correct

white balance may not be obtained. (When the flash is set to

(Auto with redeye reduction) or (Auto), the flash may fire while the

white balance data is recorded to the custom white balance. If this

happens, make sure the flash also fires when you shoot the image.)

- The ISO speed is set to the same setting to shoot the image.



White balance data cannot be set with (Stitch Assist), but the white

data acquired in another mode can be used.

- The custom white balance will not be canceled even if you reset

camera settings to default (p. 32).

Mode Dial

Effect Off Records normally with this setting.

Vivid

Emphasizes the contrast and color saturation to record bold

colors.

Neutral

Tones down the contrast and color saturation to record neutral

hues.

Low Sharpening Records subjects with softened outlines.

Sepia Records in sepia tones.

B/W Records in black and white.

Custom Effect*

You can freely set the contrast, sharpness and color saturation.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 153 154

No comments

Canon Powershot S80 User Manual Page 74