Canon PowerShot SX60 HS User Manual Page 88

  • Download
  • Add to my manuals
  • Print
  • Page
    / 203
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 87
94
Adjusting the Flash Output
Still Images
Movies
Choose from the three ash levels in [ ] mode.
1
Enter [ ] mode.
Set the mode dial to [ ].
2
Specify the ash mode.
Press the [ ] button, choose [Flash
Control] on the [ ] tab, and then press
the [ ] button.
In [Flash Mode], choose [Manual]
(
=
30).
3
Congure the setting.
Raise the ash, press the [ ] button and
immediately turn the [ ] dial to choose
the ash level, and then press the [ ]
button.
Once the setting is complete, the ash
output level is displayed.
[
]: Minimum, [ ]: Medium, [ ]:
Maximum
You can also set the ash level by accessing MENU (
=
30)
and choosing [
] tab ► [Flash Control] ► [Flash Output].
You can also access the [Built-in Flash Settings] MENU screen
(
=
30) as follows (except when an optional external ash is
mounted).
- When the ash is up, press the [
] button and immediately
press the [
] button.
After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
Screen brightness may change depending on your specied
shutter speed or aperture value. However, screen brightness
remains the same when the ash is up and the mode is set to [
].
With shutter speeds of 1.3 seconds or slower, ISO speed is [
]
and cannot be changed.
[ ]: Manual
Calculation of standard exposure is based on the specied
metering method (
=
72).
Page view 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 202 203

Comments to this Manuals

No comments