Canon C7010VPS/C6010VPS/C6010S Owner's Manual download pdf (Page 57)

Clean the binder

Introduction

Clean the outside of the machine if it gets dirty after using it for a long period of time.

Please note the following points to prevent malfunctions or electric shock when cleaning

the machine.

WARNING

•

Turn off the power switch and unplug the power plug (see ‘How to turn the

main power off’ on page 34). It may result in a fire or electric shock.

•

Never plug in or unplug the power plug while your hands are wet. Doing so

creates the risk of electric shock.

•

Do not use alcohol, benzene, paint thinner, or other flammable substances.

The volatile or flammable materials could come in contact with the machine's

electronic components and cause a fire or a short circuit.

IMPORTANT

•

Do not use any cleanser other than water or a neutral cleanser diluted with water.

Doing so may cause the machine's plastic parts to deteriorate or crack.

•

Be sure to dilute any neutral cleanser with water.

•

The machine does not need to be lubricated. Do not lubricate the machine.

Clean the binder

Open the power switch cover and press the OFF side of the power switch to turn off the

power before removing the power plug.

Dampen a soft cloth in water or neutral cleanser that has been diluted with water and

thoroughly wring it out before wiping any dirt from the machine.

After cleaning the machine with a neutral cleanser, be sure to wipe off the neutral cleanser

with a cloth that has been dampened with water.

After cleaning the machine, use a soft dry cloth to dry it.

Plug the power plug into to power outlet and press the ON side of the power switch and

then close the power switch cover.

Chapter 3 - Basic operations 57

Clean the binder

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 99 100

No comments

Canon C7010VPS/C6010VPS/C6010S Owner's Manual Page 57