Canon EOS M User Manual download pdf (Page 72)

Changing the Focusing Method

The default setting is [Enable].

Since the focus is constantly close to the

subject, when you press the shutter button,

the camera quickly focuses the subject. If

[Enable] is set, the lens will operate

frequently and consume more battery

power. This will reduce the number of

possible shots (battery life).

When an EF or EF-S lens is used, during

Continuous AF, turn off the power before

setting the lens’s focus mode switch to

<MF>.

Set the Focus mode to [AF+MF].

After focus is achieved using AF, you can adjust the focus manually as

desired using the focusing ring while holding the shutter button pressed

halfway.

However, in <5> mode (p.59) or if [AF operation] is set to [Servo AF]

(9?), priority is given to Servo AF. In such cases, even if you set the

focus mode to [AF+MF], you will not be able to focus manually.

Using Continuous AF

Using AF+MF Mode (Full-time manual focusing)

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 103 104

No comments

Canon EOS M User Manual Page 72