Canon eos5d User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 77
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
EOS 40D
Photodiode
EOS 50D
EOS 50D Gapless Microlenses
Several optical and electronic technology advancements
debut in the EOS 50D’s CMOS sensor. For starters, a
new micro manufacturing process was used in the
CMOS semiconductor production phase to increase the
light-sensitive photodiode area. Above the photodiode,
gapless microlenses improve the light-gathering efficiency
of the smaller 4.7µm pixels and help achieve high ISO
speeds (standard range from ISO 100 to 3200, with
expanded 6400 or 12,800 ISO settings possible) plus
lower noise images than on the EOS 40D.
Next, improved 4-channel data reading from each line on
the sensor paired with a new high-speed, low-voltage amp
increases the signal speed by about 1.5x over the EOS 40D’s
sensor, helping to maintain a fast 6.3 fps burst rate despite
the higher amounts of data coming from the sensor’s 15.1
megapixels. Power consumption is also reduced.
In front of the CMOS imaging surface and micro-mirror array is a protective infrared and
low-pass filter array that is similar in design to the one found on the EOS 40D. However,
as on the EOS 5D Mark II, Canon has added a dust-repelling fluorine coating to the front
surface of the first low pass filter and moved the infrared blocking, dichroic coating to the
back side of that filter.
Both new EOS DSLRs rely on the incredible speed, advanced image-processing capabilities,
and lower power consumption provided by Canons DIGIC 4 Image Processor. The major
advances and features it provides over the DIGIC III Image Processor in the EOS 40D or
older DIGIC II Image Processor found in the EOS 5D include:
1) Low noise image development, allowing for better noise reduction at all ISOs and 2
stops higher normal ISO speed in the EOS 5D Mark II.
23
IV. PERFORMANCE AND RELIABILITY
DIGIC 4 and 14-Bit A/D
Conversion
4. Low-pass filter -2
(Separates image
in vertical direction)
1. Low-pass filter -1
(Separates image
in horizontal direction)
2. Phaser layer
(Converts linear polarized
light into circular polarized light)
CMOS
sensor
Dichroic mirror
(Reflects infrared rays)
3. Infrared-absorbing glass
Infrared, Low-Pass Filter
Construction
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 76 77

Comments to this Manuals

No comments