Canon HF200 Instruction Manual Page 134

  • Download
  • Add to my manuals
  • Print
  • Page
    / 178
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 133
134 Additional Information
[AF Mode]: Select how fast the autofocus will operate.
With [ Instant AF] the autofocus adjusts quickly to a new subject.
This is convenient for example when changing the focus from a near
subject to a far subject in the background, or when recording fast-mov-
ing subjects.
When the optional Wide-converter or Tele-converter is attached to the
camcorder, it may partially obstruct the Instant AF sensor. Set the AF
mode to [ Normal AF].
[Focus Priority]: When the focus priority is activated, the camcorder
records a photo only after the focus has been adjusted automatically. You
can also select which AF frames to use.
[ AiAF Frames]: One or more AF frames out of the nine frames avail-
able are automatically selected and the focus is fixed on them.
[ Center Frame]: A single focusing frame appears in the center of the
screen and the focus is automatically fixed on it.
[ Off]: No AF frame will appear and the photo will be recorded immedi-
ately after you press .
When the recording mode is set to [ Fireworks], focus priority is auto-
matically set to [ Off].
When focus priority is activated, if face detection ( 68) is also acti-
vated, the camcorder will focus on the face of the main subject (white
face-detection frame) when one is detected.
[Image Stabilizer]: The image stabilizer compensates for camcorder
shake even at full telephoto.
The image stabilizer is designed to compensate for a normal degree of
camcorder shake.
We recommend setting the image stabilizer to [ Off] when using a
tripod.
[Auto Slow Shutter]: The camcorder automatically uses slow shutter
speeds to obtain brighter recordings in places with insufficient lighting.
Minimum shutter speed used: 1/25; 1/12 when the frame rate is set to
[ PF25].
The auto slow shutter can only be activated when the recording pro-
gram is set to [ Programmed AE], but the setting will not change even
if you set the camcorder to mode.
If a trailing afterimage appears, set the slow shutter to [ Off].
If (camcorder shake warning) appears, we recommend stabilizing
the camcorder, for example, by mounting it on a tripod.
PHOTO
Page view 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 177 178

Comments to this Manuals

No comments