Canon PowerShot G7 Instruction Manual

Shooting Remotely using an iPhone (PowerShot SX60 HS / PowerShot G7 X)

9. Choose the SSID (network name) displayed on the cameras screen from the list of detected access points displayed on the iPhone. NOTE For better

10. Tap the [Canon CW] application icon on the iPhone to start CameraWindow. NOTE When starting up CameraWindow for the first time, the iPhone nick

11. Once the iPhone is recognized on the camera, its nickname will be displayed on the camera as shown in the image below. Press the < >< &

12. When you want to view camera images on the iPhone press the < >< > buttons to choose [Yes], and then press the < > button. Th

13. Once you have connected to the iPhone, a screen like the one below will appear. Step 4: Using the iPhone to control the camera during remote s

2. Once the camera is ready for remote shooting, a live image from the camera will be displayed on the iPhone. At this time, a message is displayed

3. Use the iPhone to shoot. NOTE • Any jerky subject motion shown on the iPhone due to the connection environment will not affect recorded images. •

You can check the shooting screen and shoot remotely using your iPhone. IMPORTANT • In the following explanation, smartphone setting procedures are

Step 1: Confirming the iOS version 1. Check the iPhones requirements. The camera can connect via Wi-Fi to iPhones running the following operating sy

If CameraWindow is already installed on the iPhone, please proceed to Step 3: Connecting the camera to the iPhone. NOTE • The example procedure is

2. Touch the search icon. 3. Enter 'camerawindow' in the search field, and then touch [Search].

4. Choose [Canon CameraWindow] from the displayed search results, and install it on the iPhone. Step 3: Connecting the camera to the iPhone

NOTE The position and shape of the operation buttons, screens displayed, and setting items may differ according to the camera model you use. 1. Confi

NOTE When setting up Wi-Fi for the first time, the camera nickname registration screen will be displayed. This nickname will be displayed on the scr

8. Press the < >< > buttons to choose [Add a Device], and then press the <FUNC./SET> ( ) button. The cameras SSID is displayed o