Canon Vistura Operations Instructions download pdf (Page 22)

Mastering

the Basics

Loosen the screws on the adapter and insert the antenna

cable. Tighten the screws again.

1. Connect the RF unit to the camera, using the RC-150 RF adapter

cables.

• The RF unit and RF adapter cables are available separately.

2. Connect the antenna cable to the FROM ANT. terminal on the RF

unit.

• If your TV has flat twin-lead cable, use the 300–75 ohm adapter.

3. Connect the TO TV terminal on the RF unit to the antenna input

on the TV.

• Use the coaxial cable with F-connectors.

If your TV has flat twin-lead cable, use the 75–300 ohm adapter.

Connecting the RF unit/adapter cables

Attaching the 300–75 ohm adapter

If the antenna cable does not have antenna lugs, you will

need to strip one end of the cable and wind the wires around

the screws.

Turn the TV on, start playback on the

camera (see p. 18), and set the TV and

the RF unit to the video channel.

The video channel is the channel which

is not used by a broadcasting station in

your area and can be used for

videocassette playback (channel 3 or 4).

4CH 3CH

FROM ANTTO TV

4CH 3CH

Selecting the video channel

Note:

•Turn the camera off or disconnect it from the RF unit when you want to watch a

broadcast program.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 98 99

No comments

Canon Vistura Operations Instructions Page 22