Canon XA20 User Manual download pdf (Page 150)

Appendix: Menu Options Lists

150

• When [OLED Dimmer] is set to on, the camcorder's screen will automatically become dimmer if the

camcorder is left without any operation for 3 minutes. Operate any control on the camcorder to

return the screen to its previous setting.

[OLED Mirror Image]: When set to [i On], this function reverses the image on the screen horizontally

when you rotate the OLED panel 180 degrees toward the subject. In other words, the screen will show

a mirror image of the subject.

[OLED Color Balance]: Allows you to adjust the color balance of the OLED screen. Adjust the [B] (blue)

and [R] (red) bars by touching [+] and [-]. You can check the results on the screen.

[VF Brightness]: Sets the viewfinder screen to one of two brightness levels. You can use this to make

the screen brighter if it is difficult to see.

[Notification Sounds]: A beep will accompany some of the camcorder's operations.

• While pre-recording (A 91) is activated, the camcorder will not emit any notification sounds.

[Wireless Remote Control]: Allows the camcorder to be operated with the wireless controller.

[Tally Lamp]: Activates the tally lamp when the camcorder is recording, the wireless controller is being

operated, the battery level is low or a memory card is full. When set to [j Off], the tally lamp will not

turn on in these cases. The tally lamp is located on the handle unit so make sure you attach it to the

camcorder in advance.

[Powered IS Button]: Determines the operation mode of the assignable button set to [È Powered IS]

(A 63).

[Î Press and Hold]: Powered IS will be activated while you hold the button pressed down.

[Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.

[Set WB Priority]: You can press an assignable button set to [Ä WB Priority] to switch between the

current white balance and the white balance setting selected for [Set WB Priority].

[Focus/Zoom Ring Direction]: Changes the direction the focus/zoom ring needs to be turned.

[Focus/Zoom Ring Response]: Selects the sensitivity of the response when operating the focus/zoom

ring.

[Focus Preset Speed]: Determines the speed at which the focus changes to the preset position.

[Battery Info]: When you are using a battery pack that is compatible with Intelligent System, this option

displays a screen where you can verify the battery charge (as a percentage) and the remaining

recording time ( mode) or playback time ( mode).

• If the battery pack is exhausted, the battery information may not be displayed.

[HDMI Time Code]: When set to [i On], the HDMI signal output from the camcorder includes the

camcorder's time code.

[HDMI Status]: Displays a screen where you can verify the standard of the output signal from the HDMI

OUT terminal.

[Output Onscreen Displays]: When set to [i On], the camcorder’s onscreen displays will appear also

on the screen of a TV or monitor connected to the camcorder.

[Distance Units]: Selects the units to use for the focusing distance display while focusing manually. This

setting also affects units for GPS information when using the optional GP-E2 GPS Receiver.

COPY

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 183 184

No comments

Canon XA20 User Manual Page 150