Canon 130U User Manual

CanonSURE SHOT130uSURE SHOT130uPRSUPPR/AAIR130AAASUPER130[in i[E] Instructions [S] Instrucciones[F] Mode d'empioi ® instrugoes

Applicable Battery; One lithium battery (CR2)Loading the Battery1 Open the battery cover.• Pull the lape to remove the battery• Align the + - termin

Loading the Film1 Open the back cover and load the film.^ Position the film correctly between the film guides.3 Pull the film out to the (film leader

Loading the Filmra»A film speed of ISO 400 is recommended.• The film speed is set to ISO 25 when non-DX film is loaded. If the film does not have a DX

ìiirning the Power OnPress the main switch. ^Hold down the main switch for approximately 1 second The lens is set tothe wide-angle position• If you p

Taking Pictures in Fiash AUTO iMode iAs long as the subject is in the wide area AF frame, the subject will be in focus. The flash also fires automatic

5 Compose the shot and take the picture.• Press the shutter button fully (press firmly).• Press the shutter button slowly and gently^The picture is

Green/Orange LampsWhen you press the shutter button halfway down, the lamps light or blink to show whether the camera is ready to shoot.Green lampLit:

Taking Pictures in Flash AUTO ModeUsing Focus LockUse focus lock when you want to take a properly focused shot where the subject is not in the center

Close-up PhotographyWhen the shooting distance is closer than 1 m/3.3 ft., there is a difference between what you see in the viewfinder and the pictur

Taking Pictures in Flash AUTO Mode(ISubjects Difficult to AutofocusThe green lamp blinks 16 times per second for subjects with the following character

Handling Precautions1. This camera is not resistant to water, and should not be used outdoors if it is raining or snowing. If it is accidentally dropp

Shooting with Seif-timerThe self-timer function allows you to take a picture when you are some distance from the camera.inlU.I@JSet the camera to self

/o Do not stand directly in front of the camera when you press the shutter button as this will result in the picture being out of focus.• Set the came

\Changing the Flash Mode hYou can fire the flash for every shot or cancel flash operation to suit the subject or location,jg> fg.i US'Select t

AUTOi Flash AUTOIn dark places and in backlit conditions, the flash fires automatically.You can select whether the autoflash mode ^ initially set when

+1.5® Flash OFF with Manual — 1.5® Exposure CompensationThere is automatic exposure compensation in backlit conditions but manual exposure compensatio

Changing the Flash ModeBecause of the slow shutter speeds (up to 2 seconds) in dark places in +1.5® . ~1.5® . and modes you must use a tripod to keep

Setting the Custom Functions HYou can customize the functions listed below to suit your preferences or the photography conditions,Custom Function No.

Effects with the Function Set to 1Releases the shutter Immediately when you press the shutter button halfway down and then press It fully Useful for s

Setting the Custom FunctionsCF hOu.i!^CF d' (Set the camera toCustom Functionsetting mode.• Switch the camera oft• Hold down the ® button and p

You can use the remote control (RC-5) to release the shutter from up to 5 m /16 4 ft. in front of the cameraTransmitter button Battery holderJ5 Shoot

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interf

Remote control signal reception:Reception of the remote control signal is indicated by the red-eye reduction lamp blinking 4 times a second (or remain

Shooting with Remote ControlReplacing the Remote Control BatteryReplace the battery when you can no longer use the remote control to take pictures Bat

Imprinting the Date and Time iIGгDATE< Vaa ri^QfitK/Day>Í? DiDATE<Mooth/Udy/Véar>;> 'OPDATE< Day/Montti/Vear>is;wsDATE<

Setting the Date-13?-13 ?3j' I ^FÍ-ÍO-Z-O líi^.TE® ^ _1(Üf^ié'EÜ\ ' OíiTÍ1 Select the Date mode.2 Set the date and time.©Press the

Imprinting Captions asisnM1 Select the Captionmode. __________• Press the I MODE I button until CAPTION appears on the LCD panel,2 Select a caption

Selecting the Language1 Select the Switch Language mode.• Press the Ba button for more than 2 seconds. SLANGUAGE blinks. •LanguageCaption NoE (English

IVoubleshootingIn case of problems, check the table below before taking your camera to be repaired.Problem SolutionE3 blinks on the LCD panel.• Replac

ProblemSolution1 can’t imprint the date/time or a caption on the last frame•Use 12-, 20-, 24- or 36- exposure film with the DX- code.The date/time or

SpecificationsType: Fully-automatic 35 mm lens-shutter AF camera Recording Medium: 35 mm film Image Size: 24 x 36 mmLens: Canon zoom lens 30 - 130 mm

Flash Distance Range: (with color print film)ISO Wide-angleTelephoto100 0 6 to 3.1 m (2.0 to 10.2 ft)0,6 to 2 0 m (2 0 to 6 6 ft )400 0 6 to 6 2 m (2.

Thank you for purchasing this Canon product.Before taking pictures, please read these instructions carefully for a thorough understanding of how the c

3|Using-Red-eye Reduction FunctionEffectively... 25Setting the Custom Functions...26i Shooti

Nomenclature®Shutter button (^14)Ci)| Self-timer/Remote control GBZEm button(^20, 20, 29)AF' sensor/Metering window LCD panel (-^8. 9)Viewfinder

(0) Dioptric adjustment knobTurn this knob to adjust the focus when you cannot see the viewfinder image clearly.© Orange lamp (->16)© Green lamp (^

LCD Panel(Normally, only the required Information is displayed.)0'D ®s-tAUTO®(D @1© Custom Function number @ Self-timer © Film mark © Frame coun

Nomenclatureiij.n'» JM88?BS0mo1-CAPTION DATE tUO,-AUTOiVi1.7)I I® (i.iDate and time, caption number or Custom Function number Self-timer/Remote