
Recharging the Battery
Connect the power cord.
@ Connect the power cord to the charger.
© Connect the power plug to an AC
outlet.
Remove the cover.
o If you remove the battery from the
camera, be sure to reattach the cover
to protect against short circuit.
Attach the battery.
@ Align the battery’s top edge with the
<—> mark on the charger. While
pressing down the battery, slide it in
the direction of the arrow.
• To detach the battery, follow the above
procedure in reverse.
Recharge the battery.
► When the battery is attached to the
charger, recharging starts
automatically and the red lamp starts
blinking.
k A completely exhausted battery
takes about 90 minutes to almost
fully recharge.
Recharge Level Red lamp
0-50%
Blinks once per second
50-75% Blinks twice per second
75-90%
Blinks three times per
second
90% or higher
Stays on
The numbers around red lamp and the
blinking frequency correspond to the table
above.
18
Comments to this Manuals