Canon EOS 650 User Manual download pdf (Page 14)

1. Main Switch Functions

The main switch has four positions.

L(OFF): Turns off the camera. Be sure to set

at this position to prevent accidental shutter

release when not in use.

A(ON):Activates the camera. (The electronic

beeper tone does not sound at this position.)

22

(m)(ON); In addition to being the same ON posi

tion as “A”, the electronic beeper tone sounds

In the following cases;

1) When correct focus is obtained. ~AF focus

signal (short beeper tone)

2) When the automatically-set shutter speed

is too slow to hand-hold.-Camera-shake

warning (long beeper tone)

a (ON): Full auto position. The setting will be

as follows automatically regardless of the

mode.

1) AF mode - ONE SHOT

2) AE mode — P (Program)

3) Film winding mode - S (Single)

4) • Electronic beeper tone

- short; AF focus signal

- long; camera-shake warning

Various AE and AF modes described in

“Making the Most of Your EOS 620/650”

cannot be set when the main switch is at

the “O” position. Make sure the main

switch is set to “A” or“(<•»)” position.

23

1 ... 13 14 15 ... 45

Comments to this Manuals

No comments