Canon FAX-B155 User's Guide download pdf (Page 86)

Operation for Network Switch System ________

The procedures for using the Network Switch System are almost the same as when

using the fax over a normal telephone line. When you receive calls, however, the fax

will respond slightly differently as described below.

When you hear the telephone call ring pattern:

Pick up the handset and talk normally. If you hear a slow beep, it means the call is

from a fax machine trying to send a document. Press [Start/Copy] to receive the

document. If you do not pick up the handset, the fax continues to ring until the other

party hangs up. If an answering machine is connected, it takes over the call.

When you hear the fax call ring pattern (triple ring):

After the fax rings, it receives the document automatically.

If you want to receive a document without ring:

First, make sure the fax is in Fax/Tel mode (“Fax/Tel” displayed on the LCD). Then

set INCOMING RING in the RX SETTINGS to OFF. See p. 87. When someone

sends a document, the fax receives it automatically without ringing.

1 ... 85 86 87 ... 141

No comments

Canon FAX-B155 User's Guide Page 86