Canon XC10 User Manual download pdf (Page 17)

Step 1: Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the compact power adapter.

The first time you use the camcorder, charge the battery pack.

For approximate charging times and recording/playback times with a fully charged battery pack, refer

Recording and Playback Times

(; 163).

1 Connect the power cord to the compact power

adapter.

2 Plug the power cord into a power outlet.

3 Connect the compact power adapter to the

camcorder’s DC IN terminal.

4 Slide the BATT. OPEN switch in the direction of the

arrow and open the battery compartment cover.

5 Insert the battery pack all the way into the

compartment as shown in the illustration.

• Push it all the way in until the battery release latch

secures it in place.

6 Close the battery compartment cover.

• Push the cover until you hear a click. Do not force the

cover closed if the battery pack is not correctly

inserted.

7 Charging will start when the camcorder is turned

off.

• If the camcorder was on, the green POWER/CHG

indicator will go out when you turn off the camcorder.

After a moment, the POWER/CHG indicator will turn

on in red (battery pack charging). The red POWER/

CHG indicator will go out when the battery pack is fully

charged.

• If the indicator flashes, refer to

Troubleshooting

(; 142).

햲

햴

햳

DC IN terminal

햳

햲

POWER/CHG

(battery pack

charging)

indicator

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 38 39

No comments

Canon XC10 User Manual Page 17