Canon XC10 User Manual download pdf (Page 27)

Step 5: Preparing Recording Media

Removing a CFast card

1 Wait until the ACCESS indicator is off.

2 Slide the CARD OPEN switch in the direction of

the arrow and open the recording media slot

cover.

3 Push in the CFast card release button to

release the CFast card.

4 Pull the CFast card all the way out and close

the recording media slot cover.

IMPORTANT

• Observe the following precautions while the ACCESS indicator is on or flashing in red.

Failure to do so may result in permanent data loss.

- Do not disconnect the power source or turn off the camcorder.

- Do not open the recording media slot cover.

Inserting and Removing an SD Card

1 Make sure the ACCESS indicator is off.

2 Slide the CARD OPEN switch in the direction

of the arrow and open the recording media

slot cover.

3 Insert the SD card, with the label facing up, all

the way into the SD card slot until it clicks.

• To remove the SD card, push the SD card once

to release it. When the SD card springs out, pull

it all the way out.

4 Close the recording media slot cover.

• Do not force the cover closed if the SD card is

not correctly inserted.

ACCESS indicator Recording media status

On or flashing Accessing the recording media.

Off

A recording media is not inserted or

it is not being accessed.

햴

햵

ACCESS

indicator

햳

햴

햵

ACCESS

indicator

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 38 39

No comments

Canon XC10 User Manual Page 27