Canon Projectors User Manual download pdf (Page 119)

119

MAINTENANCE

Replacing the Lamp

1 Turn off the projector, disconnect the power

plug from the AC outlet, and then let the pro-

jector stand for at least 1 hour.

2 Loosen a screw with a flathead screwdriver

and remove the lamp cover.

3 Loosen two screws, pull up the handle, and

then remove the lamp.

4 Fully insert a new lamp and secure it with two

screws.

* After the installation, be sure to push down

the handle.

5 Replace the lamp cover and tighten the

screw.

6 Turn on the projector.

7 Bring up the menu and select [System set-

tings] -> [Other settings] -> [Lamp counter]

(P114).

8 Select [Reset] -> [OK] to reset the lamp

counter.

Lamp cover

Screw

Lamp

Handle

Lamp cover

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 140 141

No comments

Canon Projectors User Manual Page 119