Canon VR-10 User Manual download pdf (Page 12)

Phase One

January 2014

Page 12 of 14

Recommendations and limitations

All users

• When you have disconnected a camera do not reconnect a camera until the Camera tool

status changes to "No Camera Attached".

DSLR users

• For Canon 5D, 20D and 350D/Rebel XT: Set the camera’s communication setting to PC

connection or Normal to enable remote capture. Do not use the Print/PTP or PTP setting.

• Connecting some Canon cameras to the computer after launching Capture One might result

in tethered capture being unavailable. If you experience this, connect the camera to the

computer prior to launching Capture One.

• Processing/export to DNG is not supported for Fuji RAW files.

• LCC analysis not supported for Canon sRAW, mRAW and Fujifilm RAW files.

Back users

• For tethered shooting with Phase One digital backs make sure that your system can either

supply at least 10W power via Firewire (more than most laptops can supply) or make sure

to activate the “Force Battery” setting on the back. Use the 4.5m Phase One Firewire cable.

• For tethered shooting with Leaf and Mamiya DM digital backs make sure that your system

can supply at least 12W power via Firewire (more than most laptops can supply). Use a

Leaf or Mamiya Firewire cable.

• Do not open the shutter on the camera prior to opening the Live View window. Doing so

will generate errors on the digital back after closing the Live View window. The

recommended procedure for using Live View is to first open the Live View window, then

open the shutter on the camera, use Live View as desired, when done, close the shutter on

the camera, and close the Live View window.

• For Leaf Backs and Mamiya DM systems, the camera body must be selected in preferences

before connecting the back.

• For Leaf Backs and Mamiya DM systems, in the case of a communication error during

firmware upload, please wait 10 minutes before disconnecting the FireWire cable.

• Leaf Aptus II 8 only works with black and white live view.

• Focus controls for iXR and iXA cameras are only supported by IQ and Credo backs.

1 2 ... 7 8 9 10 11 12 13 14

No comments

Canon VR-10 User Manual Page 12